Aspenta FZ KF-001 UbTrack key fob User Manual uBTRACK 301 uSER gUIDE

Aspenta international FZ-LLC UbTrack key fob uBTRACK 301 uSER gUIDE

User Manual

QSG UbTrack™ 301   SECTION 1   Aspenta UbTrack 301 Permanently Installed Vehicle Locator  Quick Start Guide   SECTION 2 UbTrack™ 301 Overview             Note: Your UbTrack™ wireless key fob has to paired with your device after installation and activation.  UbTrack™ key fob automates arming and disarming of the UbTrack™ 301 security feature. Please keep it with you on your keychain.  1- Power button 2- GSM LED 3- GPS LED 4- Reset Button 5- SMA Adapter for GPS Antenna 6- SMA Adapter for GSM Antenna 7- Two-PIN Power Connector 8- Functional button 9- 9-Status Light  For a complete UbTrack user rmanual, FAQs and troubleshooting tips please go to  SECTION 3   It is strongly recommended that you record and save the 12 character device ID number below the barcode on the back of your UbTrack™ 101 locator.  It is also recommended that you read the owner’s manual thoroughly prior to operating your device. 1 2 3 4 5 6 7 8 9
QSG UbTrack™ 301   Device ID: _ _ _ _  -  _ _ _ _ -  _ _ _ _    SECTION 4  To begin using your UbTrack™ locator, please follow these easy steps:   STEP 1  Install  It is recommended that an automotive service center perform this work for you following the instructions within the enclosed Installation Guide.  This guide can also be downloaded at   STEP 2  Connect Next you need to create a free UbWall™ account to register, activate, program, and monitor your UbTrack™ 301 locator.  This can be done online from your computer, or via your smartphone. For your security, establishing your UbWall™ account is a two-step process, requiring verification of your email address.         STEP 3 Activate   Once you have created and verified your UbWall™ account, you can now log in and select the “Add a Device” option to add and activate your new UbTrack™ 301 device and configure it.  STEP 4 Adjust   Control from your Computer     Download the UbWall™ Mobile App & access your connected devices on the go!
QSG UbTrack™ 301  You are now ready to begin using your device.  If you have chosen to track the device continuously, then simply click on your device within UbWall™ to see its’ location or location history displayed on a map.   If, for privacy reasons, you have chosen to configure your device to transmit your location information only in the event of an alarm, you can still use UbWall™ to manage and adjust the device settings, program your email and SMS notifications, share your device with other UbWall users, etc.    SECTION 5 Key Fob Pairing   SECTION 6 Warranty  Your  UbTrack™  Locator  has  a  Limited Warranty  for 12  months from  the  date  of  purchase against all defects  in  materials  and  workmanship.  For  full  details  regarding  our  Limited  Warranty  please  visit    SECTION 7  © Copyright 2014 Aspenta. All rights reserved. Aspenta and Aspenta UbTrack are trademarks or registered trademarks of Aspenta, LLC. in the U.S., Canada, and/or other countries. V1.0                   FCC ID: 2ADTO-KF-001  changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.
QSG UbTrack™ 301  -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu