Imation TDKA73 TDK WIRELESS BOOMBOX User Manual Usermanual

Imation Corp. TDK WIRELESS BOOMBOX Usermanual

Users Manual

Wireless Boombox
OPERATION
63952712-A
GENERAL:
Power Source........DC 18V, 2A Adapter (Center Pos.)
Power (DC) .........Internal NiMH rechargeable battery
Dimensions .......... .17 (W) x 11.5 (H) x 4 (D) inches
Weight .. ....................................................... XXXlbs
Speakers.........2 x 2 inch full-range drivers, 1 x 5.25
.......inch subwoofer, 2 x 5.25 inch passive radiators
The TDK Life on Record Logo is a trademark of TDK Corporation and is used under license.
All other trademarks and logos are property of their respective owners.
Output Power ............. . 7W x 2 + 15W (subwoofer)
Wireless Audio ...... Bluetooth version 2.1-A2DP profile
Line-input Audio ................ 3.5mm stereo jack up to
...............................................2.5Vrms input signal
USB Port.............................5 V @ 2.1 A charge only
RADIO SECTION:
Frequency Range (FM)....................... 87.5-108MHz
Frequency Range (AM) ..................... 530-1710KHz
SPECIFICATIONS AND COMPATIBILITY
TDKperformance.eu
A73
User Guide
Please read these instructions completely
before operating this product
Headphone Jack (Rear of Unit)
For private listening, simply plug headphones into the Headphone jack Xon the rear of
this unit. The speaker’s sound will be muted when headphones are inserted.
AUX Jack (Rear of Unit)
Insert one end of an audio cable (not
included) into the LINE OUT jack on your
external audio unit and the other end into
the AUX jack Uon the rear of this unit.
To listen to the external audio unit, turn
this unit on and turn on the external unit
as well. Press the Source/Select control
x once so all the modes light. Rotate
the Source/Select control xto the AUX
position to select the Line In mode. Start
playback of the external unit and the
external audio unit’s output sound will be
heard through this unit’s speakers.
Turning the Unit On and Off:
1. The main power switch is on the rear of the unit. Slide to the ON position to turn the
unit on and activate the Power/Volume control on the main unit and the Power button
on the remote.
2. Once the main power switch is turned on, you can turn the unit on or off by pressing
the Power/Volume control v on the main unit. If using the remote, press the Power
button am to turn the unit on. Press the OFF button al to turn the unit off.
Pairing a Bluetooth Device
1. Turn the unit on; the previously listened to source and volume will be selected.
2. Press the Source/Select control x once so all the modes light. Rotate the Source/
Select control xto the Bluetooth ( ) position to select the Bluetooth mode.
3. Press and hold the Source/Select control xfor approximately 3 seconds until the
Bluetooth indicator blinks quickly to make the speaker “discoverable”.
4. On the bluetooth device, enable bluetooth and select “A73” from the Device List. If the
bluetooth device asks for a passkey, use “0000”. Some bluetooth devices will ask you
to accept the connection. If the units are paired properly, the speaker will beep and the
Bluetooth indicator will light solid. If it failed, the Bluetooth indicator will blink slowly.
Note: After you pair a device, this unit will remember it for future use.
Using a Bluetooth Device
1. Turn the unit on; the previously listened to source and volume will be selected.
2. With a unit paired (see previous section), press the Source/Select control x once so
all the modes light. Rotate the Source/Select control xto the Bluetooth ( )position
to select the Bluetooth mode.
3. Operate your bluetooth device and its sound will be heard through this unit’s speakers.
4. Adjust the volume using the Power/Volume control v on this unit, or the Volume
AC CONNECTION / RECHARGING THE BATTERY
LOCATION OF CONTROLS
This unit has a built-in rechargeable battery that will automatically be charged as long as the
unit is plugged in. When charging, the Battery indicator will light red. When fully charged,
the indicator will turn off.
If the battery is low, the Battery indicator will fade in and out in a red hue.
Note: The battery will provide approximately 6 hours of operation at 50% volume or 2 hours
at 100% volume.
1. Carrying Handle
2. Power/Volume Control
3. Display
4. Source/Select Control
5. Remote Sensor
Notes:
t 0OMZVTFUIFTVQQMJFE"$BEBQUFS
t 3FNPWFCPUIUIF%$QMVHBOE"$*/QMVHUPEJTDPOOFDU"$BEBQUFSXIFOOPUJOVTF
t %JTDPOOFDUUIF"$DPSEUPVTFXJUI%$QPXFSSFDIBSHFBCMFCBUUFSZ
Wireless
Boombox
US AC
Plug
Shown
1. Select the appropriate
plug for your country
and connect it to the
AC power adapter.
2. Connect the AC power
adapter jack to the DC
IN jack Won the rear
of the unit and then
connect the plug to a
100V-240V wall outlet.
Rechargeable Battery Notes:
t &BDIUJNFZPVDIBSHFBOE EJTDIBSHF UIF CBUUFSZDIBSHFDZDMFTCBUUFSZ DBQBDJUZ
slightly diminishes. Rechargeable batteries have a limited number of charge cycles
and need to be replaced eventually.
t :PVNBZXJTIUPSFQMBDFZPVSCBUUFSZXIFOPSCFGPSFUIFCBUUFSZEPFTOPUTVQQMZFOPVHI
power to operate your device. Also, proper disposal is essential from environmental and
safety point of view. Putting any battery directly in the trash will harm the environment.
t %POPUJODJOFSBUF
Replacing the Remote Control Battery:
1. Remove the Battery Compartment by
pressing in on the tab and then sliding the
compartment out.
2. Install a CR2025 battery, paying attention
to the polarity diagram in the compartment
(positive side up).
3. Replace the Battery Compartment.
Replacing the Rechargeable Battery:
If the battery does not supply enough power (see note in Rechargeable Battery Notes box
below), replace the rechargeable battery as follows:
1. Remove the screws on the bottom of the unit and remove the bottom plate.
2. Unplug the rechargeable battery and replace with battery pack with the following specs,
(xxxxx,xxxxx,xxxxx ADVISE SPECS)
3. Replace the bottom plate and tighten the screws.
2
1
4
3
5
12. OFF Button
13. Power Button
14. Bluetooth Button
15. SEEK Buttons
16. AUX Button
17. FM Button
18. AM Button
19. Mute Button
20. Volume Buttons
21. Preset Buttons
LOCATION OF CONTROLS (CONTINUED)
OFF
AUX
FM
AM
12
34
X
13
12
14
16
15
17
18
19
20
21
control on the Bluetooth device, and adjust the Bass and Treble as described later in
this guide.
5. To mute the sound, press the Mute button as on the remote control.
IMPORTANT: After step 2, you have two minutes to pair the units.
Charging a Bluetooth Device with this Unit
On the rear of this unit is a USB jack that can be connected to a USB device, which will
charge if the unit is connected to AC power.
Using the AM or FM Radio
1. Rotate the Volume/Power control v to turn the unit on; the previously listened to
source and volume will be selected.
2. Press the Source/Select control x once so all the modes light. Rotate the Source/
Select control xto the AM or FM position to select the radio mode.
3. When AM or FM appears in the display, the unit is in Tuner mode, so use the Source/
Select control x to select a station. If all the indicators appear around the Source/
Select control, the unit is in Select mode; in this case press the Source/Select control
xto make it operate as a tuning control.
4. To have the unit automatically scan for the next strong station, press the SEEK Up or
Down button ao on the remote control.
5. Adjust the volume using the Volume/Power control v and adjust the Bass and Treble
as described later in this guide.
6. To select another source, press the Source/Select control x to enter the Select mode
and make it operate as a source selector.
7. To mute the sound, press the Mute button as on the remote control.
AM Antenna: Insert the AM Antenna plug into the AM Antenna jack on the rear of the unit
for best AM reception. Assemble the stand by rotating and inserting the tabs until they click.
Setting the FM Presets
1. Turn the unit on and select a station as described in steps 1 through 3 above.
2. Press and hold the desired Preset button bk on the remote control for three seconds.
The Preset number will blink three times in the display to confirm setting.
3. To call up a preset, simply press and release the Preset number bk on the remote
control.
Changing the FM region
This unit allows you to set the desired radio region as follows:
With the power on, press and hold the Volume/Powervand Source/Selectxcontrols
simultaneously for at least four seconds to enter the radio region setting mode.
Scroll through the menu using the Source/Select control x to select the desired region, then
press the Source/Select x control to confirm.
When finished, scroll using the Source/Select control x to select “EXIT”, then press the
Source/Select control x.
Region 1 – United States (87.5MHz to 108MHz)
Region 2 – Europe (87.5MHz to 108MHz)
Region 3 – Japan (76MHz to 108MHz)
Setting the EQ and Bass
1. Press the Source/Select control x once so all the modes light. Rotate the Source/
Select control xto the BAS (Bass) or TRE (Treble) position.
2. Adjust the setting using the Volume/Power control v.
Note: If no setting has taken place for five seconds, the unit will exit the Bass/Treble
setting mode and will revert to the previous mode.
Auto Power Off
If the unit has no audio signal, and/or a USB device is not charging, for 20 minutes, the
unit will turn itself off.
Press one of the Mode buttons (Bluetooth, AUX, FM
or AM) to access the respective mode.
6. AUX Jack
7. Main Power (OFF/ON) Switch
8. DC IN Jack
9. Headphone Jack
10. AM Antenna Jack
11. USB CHARGE Jack
7
6
8
10
9
11
Specifications are subject to change without notice.
OPERATION (CONTINUED)
Greg,
The contact info is on the second page.
TDKperformance.eu
A73
User Guide
Please read these instructions completely
before operating this product
Wireless Boombox
THIS WILL GO AT THE END OF THE MANUAL --------------------------
Technical Assistance
Assistance technique
Technische Hilfe
Technische assistentie
Assistenza tecnica
Asistencia técnica
Assistência técnica
Техническая помощь
Pomoc techniczna
Technická pomoc
ᢇ⾙ᨥᥴ
ὤ㍔ 㫴㠄Vᡕ㸨ᬄᧉᡕᴄतࡾΊ
US ....................................................................................................800-285-2783
DE/AT/CH ...................................................................................+49 2131 226 311
IT ...............................................................................................+39 022 1043 818
ES/PT ...........................................................................................+34 900 993 166
UK/IE......................................................................................+44 (0)1344 402201
NL/Other EU ............................................................................ +31 (0)23 521 2605
SG ....................................................................................................65-6499-7199
AU/NZ .................................................................................................800-225-013
JP.....................................................................................................0120-81-0536
CN ................................................................................................8621-6121-2122
KR.......................................................................................................02-2012-999
HK...................................................................................................852-2161-2888
Imation Enterprises Corp.
1 Imation Way, Oakdale, MN 55128-3414 USA
www.tdkperformance.com
Imation Europe B.V.
Siriusdreef 46-52
2132 WT Hoofddorp
The Netherlands
www.tdkperformance.eu
Imation Singapore Pte. Ltd.
Unit 02-02 New Tech Park 151 Lorong Chuan
Singapore 556741
www.tdk-media.com.sg
Imation ANZ Pty Ltd
Unit 2, 1 Coronation Avenue Kings Park, NSW 2148
www.tdkperformance.com.au
ኁኾዙኔዄዐ㪹㆞↩䯍
ᇽ
㨀℻掌䂚廆◉䯭⸽ⓜ槡⼀ኇዙክወኰወ
ZZZWGNPHGLDMS
㊰㟞≰᧤ₙ䀆᧥㦘棟⏻⚇
₼⦌ₙ䀆㈟㻖◉䁽䀆₼恾⚆䓀初浧⮶☵⸳
ZZZLPDWLRQFRPFQ
㊰㟞≰氨䂾㦘棟⏻⚇
氨䂾▦屡喀䤖拢壮噾㑚ℳ㢢ㅲ⫃,,㦮ⷦ㲢
ZZZLPDWLRQFRPKN
늱넩ꐉ넩ꬍ뤉ꍡ껹7'./R5ꩡ꽺ꜵ
꫑끭겑ꍽ붡霡뗲놹鶎ꖭ덵ꠁ點럪
隕闒ꩶ鲩겙
ZZZLPDWLRQFRNU

Navigation menu