Hubbell Wiring Device Kellems Pin & Sleeve Devices/Mechanical Interlocks

2014-09-05

: Pdf 121671-Attachment 121671-Attachment 783585 Batch7 unilog

Open the PDF directly: View PDF PDF.
Page Count: 40

G-1www.hubbell-wiring.com Wiring Device-Kellems
®
Section G
Pin and Sleeve Devices/Mechanical Interlocks
Index
Product Page
Configurations Chart .............................................G-3
IEC Pin and Sleeve
Watertight Devices ..............................................G-6
Corrosion Resistant Devices ......................................G-8
Data Center Pin and Sleeve ......................................G-9
Back Boxes ..................................................G-10
Accessories ..................................................G-11
Dimensions ..................................................G-12
Unfused Circuit-Lock® Mechanical Interlocks
Devices and “Reverse Service” ...................................G-17
Accessories and Dimensions ....................................G-18
Fused Circuit-Lock® Mechanical Interlocks
Devices and Accessories .......................................G-21
Low Profile Pin and Sleeve
Devices and Specifications ......................................G-24
Low Profile Dimensions .........................................G-25
IEC Pin and Sleeve Terminal Identification ..........................G-26
UL 1686 C1 Insulgrip® Pin and Sleeve
Style I and Style II Devices ......................................G-30
“Reverse Service” Style I and II Devices ............................G-31
Back Boxes and Accessories ....................................G-32
Dimensions ..................................................G-33
Insulgrip® Mechanical Interlocks
Style II, Fused and Unfused Devices ..............................G-37
Hazardous Location Devices
Mechanical Interlocks and Plugs .................................G-40
HBL® Watertight
IEC Pin and Sleeve
Circuit-Lock® Unfused and
Fused Mechanical Interlocks
Insulgrip® NEMA 4X
UL 1686 C1 Pin and Sleeve
Back Boxes & Accessories
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-2 Wiring Device-Kellems
®
Pin and Sleeve Devices
Summary
Insulgrip® NEMA 4X UL 1686
C1 Devices
Metallic where you want it and
non-metallic where you need it.
This tough product line is NEMA
4X rated for use in the harshest
environments. The devices are
fully interchangeable with other
manufacturers of UL1686
C1 devices.
IEC Watertight Devices
Provide safe and dependable
performance in the most
demanding environments. Heavy
duty non-conductive nylon
construction provides impact and
corrosion protection. Thermoset
polyester contact carriers withstand
high temperatures and provide
resistance to electrical tracking.
Back Boxes and Accessories
A complete line of metallic
and non-metallic back boxes,
angle adapters, closure caps
and liquidtight adapters are
available. These accessories help
complement the line and aid in the
installation of the product.
Circuit-Lock® Mechanical Interlocks
Hubbell’s Circuit-Lock enclosure
products virtually eliminate making
or breaking the circuit under load.
This revolutionary design incorporates
a disconnect switch and receptacle
in one compact non-metallic unit.
They are available in either a fused
or non-fused versions.
Low Profile Devices
90° Angled plugs and recessed
receptacles allow for connections
in tight spaces. Cords can be
controlled easily along the wall.
The integrated cord grips limit
strain on terminals and prevent
strain on plugs and cables exiting
perpendicular from the wall.
Corrosion Resistant Devices
This superior grade of IEC and
Insulgrip devices are ideal for the
most demanding environments.
Nickel-plated brass on the IEC and
nickel-plated Tellurium copper on
the Insulgrip contacts prevent
corrosion and heat rise.
Reverse Service
Generators and portable power
distribution units require devices to
deliver power in a reverse direction
to power up a piece of equipment
or building. Hubbell manufactures
reverse service devices in both the
IEC and Insulgrip Pin and Sleeve
configurations as well as IEC
Mechanical Interlock Inlets.
Hubbell Produces the Highest Quality
and Most Extensive Pin and Sleeve
Offering.
Similar to our Twist-Lock® devices, Hubbell’s Pin and
Sleeve line of plugs, connectors, inlets, receptacles,
mechanical interlocks and accessories are the highest
performing products available. The HBL® series of IEC
pin and sleeve and Insulgrip lines are assembled in the
USA and have a full list of innovative features.
The IEC line of plugs and connectors are made with a
rugged super tough, one-piece housing. The thermoset
polyester contact carrier provides a high resistance to
electrical tracking. They withstand higher temperatures
which may result from overload or arcing. The heavy-duty,
external cord grip provides superior strain relief on the
conductors.
The Insulgrip line of pin and sleeve is listed UL Type 4X
which provides a watertight, dust-tight seal for harsh
environments. The non-metallic bodies of the plugs and
connectors provide excellent insulating, impact and UV
resistant properties. The patented beryllium copper spring-
pin design of the contacts maintains high unit pressure
on mating sleeves. This ensures reliable electrical contact
while minimizing heat rise. There are two styles of Insulgrip
pin and sleeve devices. Style I devices achieve grounding
by attaching the metallic shell to a ground terminal within
the device. Style II devices feature redundant grounding
by including an additional ground pin and sleeve to the
grounding method used in Style I. The full Insulgrip line of
devices is interchangeable with other manufacturers of
UL1686 C1 devices which makes it ideal for use in industrial
applications where multiple manufactures of product may
be present.
Both the IEC and Insulgrip lines of pin and sleeve are used
often in conjunction with mechanical interlocks. Mechanical
interlocks prevent users from mating or breaking the
circuit under load. This feature is critical to maintain a safe
electrical connection. The interlocks are also available in
reverse service applications where a generator is providing
power to an electrical system.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-3www.hubbell-wiring.com Wiring Device-Kellems
®
5
6
7
8
9
10
11 12 1
2
3
4
Rated Voltage
100V - 130V
125V/250V
200V - 250V
277V
380V - 480V
500V - 690V
Color
4
P
o
l
e
5
W
i
r
e
G
r
o
u
n
d
i
n
g
3
P
o
l
e
4
W
i
r
e
G
r
o
u
n
d
i
n
g
2
P
o
l
e
3
W
i
r
e
G
r
o
u
n
d
i
n
g
125/250V
AC
440-460V
(60Hz)
250V
DC 380V 50Hz
440V 60Hz
3Ø 250V3ØY
120/208V
480V AC
600V AC
3ØY
347/600V
3ØY
277/480V
125V
AC
277V
AC
250V
AC
380-415V
AC
380-
415V
200/346V AC
240/415V AC
480V
AC
550V
DC
400V DC
IEC Pin and Sleeve
IEC Configurations Chart
Typical IEC Pin and Sleeve Catalog Number
Explanation
(HBL) Designates First Digit Next Series Of Digits Letter Last Digit(s) Letter: W
Hubbell Catalog 3-3 wire Preceding a letter P-Plug After the letter. This denotes Watertight
Number 4-4 wire 20-20 Amp R-Receptacle the position of the ground
5-5 wire 30-30 Amp C-Connector sleeve and the assigned
60-60 Amp B-Inlet voltage in the receptacle as
100-100 Amp MI-Mechanical it relates to the hours of the
Interlock clock. This is done to eliminate
MIF-Mechanical interchangeability between
Interlock Fused devices with different voltages.
HBL4100C12W
HBL 4 100 C 12 W
WatertightHubbell Catalog Number
Female Ground Sleeve at “12” O’Clock (125/250V)
“C” Connector
4 Wire
100 Amp
1 2 3 4 65
Singly Rated Configurations
Hubbell Pin and Sleeve products are designed and
manufactured to meet the International Standard IEC
60309-1 and IEC 60309-2. This device standard calls out
a singly rated, non-interchangeable configuration for every
voltage and type of service throughout the world. Pin and
sleeve device housings are color coded by voltage rating.
Voltage
The voltage is determined by the location of the female
ground contact relative to the housing keyway. Simply by
manufacturing the device with a ground contact in a certain
“clock position, the device will be rated for a particular
voltage system. The diagram shows the keying position and
the color coding that is associated with each voltage.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-4 Wiring Device-Kellems
®
Insulated Non-Metallic Housing
Super tough, non-conductive and chemical resistant for
heavy duty industrial environments
Color Coded Housings
IEC pin and sleeve devices are color coded
by voltage for easy identication
Watertight Neoprene Sealing Glands
Provide a reliable seal at the cable entry point.
Prevents inltration of contaminants
Self-Closing Gasketed Cover
Detents into position to fully close automatically.
Corrosion-resistant hardware
Liquidtight Conduit Adapters
Machined aluminum adapters are available to
provide a means for attaching exible liquidtight
metal conduit to rear of Hubbell Pin and Sleeve
plug or connector
IEC Pin and Sleeve
Watertight Devices
Features and Benefits
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations. Captive
barrel nuts ease assembly and
allow higher tightening torque for
maximum cord retention.
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
Sequential Contact
Engagement
Ground makes rst and
breaks last. Neutral makes
second and breaks second
(to prevent a momentary
over-voltage on components
connected phase to neutral).
Phase contacts make last
and break rst.
Multi-Contact Spring
(60/63 and 100/125 Amp)
Recessed within the female
sleeve, provides and
maintains high unit pressure
on mating pins to minimize
temperature rise. Broaches
oxide lm to achieve low
resistance contact for
cooler operation.
IP67
SUITABILITY
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-5www.hubbell-wiring.com Wiring Device-Kellems
®
Gasketed Sealing Ring
Provides watertight seal when mated
with receptacle or connector
Contact Collar
Raised collar surrounds each phase pin
increasing the tracking resistance between
contacts across the contact carrier face Lockout/Tagout
Tapered opening on plug
shroud accommodates up
to ³⁄₈ inch (9.7mm) lock
shackle diameter
Heavy Duty External Cord Grips
Provide maximum cord retention to
maintain secure terminations
Solid One-Piece Pins
Machined from solid brass
for longer life and reliable
electrical contact
IEC Pin and Sleeve
Watertight Devices
Features and Benefits
Swivel Pressure Pads
16/20 and 30/32 Amp devices
feature patented swiveling
pressure pad terminal screws and
prevent damage to conductor
strands. 60/63 and 100/125 Amp
devices feature large hex-head
stainless steel screws which
provide higher torque levels for
secure terminations. The large
box terminals are designed for
North American conductors.
Rugged One-Piece Housing
Thick wall construction protects
internal components, eliminates
joints preventing inltration
of contaminants. Amperage/
voltage rating and catalog
number molded in housing for
easy identication.
Shrouded Pins
Super tough plug shroud
protects pins from
deforming from physical
abuse. Protects the user
from the possibility of
touching live contacts
during insertion and
withdrawal of mating parts.
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which
may result from overload or
arcing. Thermoset properties
provide dimensional stability
for this critical assembly.
IP67
SUITABILITY
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-6 Wiring Device-Kellems
®
Rating Watertight Devices Accessories Replacement Interiors
Amps
Poles
and
Wires
Configuration
Recep./ Plug/
Conn. Inlet AC Voltage Receptacle Plug
Connector
Inlet
Back Boxes
Non -Metallic Metallic
Closure
Caps
Recep./
Conn.
Plug/
Inlet
16 2P 3W 100-130V
HBL316R4W HBL316P4W HBL316C4W HBL316B4WBB2030N BB201W
BB301W PC320 IN320BF IN320BM
2P 3W 220-240V
HBL316R6W HBL316P6W HBL316C6W HBL316B6W BB2030N BB201W
BB301W PC320 IN320BF IN320BM
3P 4W 380-415V
HBL416R6W HBL416P6W HBL416C6W HBL416B6WBB2030N BB201W
BB301W PC420 IN420DF IN420DM
4P 5W 220/380V
240/415V
HBL516R6W HBL516P6W HBL516C6W HBL516B6W BB2030N BB201W
BB301W PC520 IN520EFIN520EM
20 2P 3W 125V
HBL320R4W HBL320P4W HBL320C4W HBL320B4W BB2030N BB201W
BB301W PC320 IN320AF IN320AM
2P 3W 250V
HBL320R6W HBL320P6W HBL320C6W HBL320B6W BB2030N BB201W
BB301W PC320 IN320BF IN320BM
2P 3W 480V
HBL320R7W HBL320P7W HBL320C7W HBL320B7W BB2030N BB201W
BB301W PC320 IN320BF IN320BM
3P 4W 125/250V
HBL420R12W HBL420P12W HBL420C12W HBL420B12W BB2030N BB201W
BB301W PC420 IN420CF IN420CM
3P 4W 3Ø 250V
HBL420R9W HBL420P9W HBL420C9W HBL420B9W BB2030N BB201W
BB301W PC420 IN420DF IN420DM
3P 4W 3Ø 480V
HBL420R7W HBL420P7W HBL420C7W HBL420B7W BB2030N BB201W
BB301W PC420 IN420DF IN420DM
3P 4W 3Ø 600V
HBL420R5W HBL420P5W HBL420C5W HBL420B5W BB2030N BB201W
BB301W PC420 IN420DF IN420DM
4P 5W 3ØY
120/208V
HBL520R9W HBL520P9W HBL520C9W HBL520B9W BB2030N BB201W
BB301W PC520 IN520EFIN520EM
4P 5W 3ØY
277/480V
HBL520R7W HBL520P7W HBL520C7W HBL520B7W BB2030N BB201W
BB301W PC520 IN520EFIN520EM
4P 5W 3ØY
347/600V
HBL520R5W HBL520P5W HBL520C5W HBL520B5W BB2030N BB201W
BB301W PC520 IN520EFIN520EM
30 2P 3W 125V
HBL330R4W HBL330P4W HBL330C4W HBL330B4W BB2030N BB201W
BB301W PC3430 IN330AF IN330AM
2P 3W 250V
HBL330R6W HBL330P6W HBL330C6W HBL330B6W BB2030N BB201W
BB301W PC3430 IN330BF IN330BM
2P 3W 480V
HBL330R7W HBL330P7W HBL330C7W HBL330B7W BB2030N BB201W
BB301W PC3430 IN330BF IN330BM
3P 4W 125/250V
HBL430R12W HBL430P12W HBL430C12W HBL430B12W BB2030N BB201W
BB301W PC3430 IN430CF IN430CM
3P 4W 3Ø 250V
HBL430R9W HBL430P9W HBL430C9W HBL430B9W BB2030N BB201W
BB301W PC3430 IN430DF IN430DM
3P 4W 3Ø 480V
HBL430R7W HBL430P7W HBL430C7W HBL430B7W BB2030N BB201W
BB301W PC3430 IN430DF IN430DM
3P 4W 3Ø 600V
HBL430R5W HBL430P5W HBL430C5W HBL430B5W BB2030N BB201W
BB301W PC3430 IN430DF IN430DM
4P 5W 3ØY
120/208V
HBL530R9W HBL530P9W HBL530C9W HBL530B9W BB2030N BB201W
BB301W PC530 IN530EF IN530EM
4P 5W 3ØY
277/480V
HBL530R7W HBL530P7W HBL530C7W HBL530B7W BB2030N BB201W
BB301W PC530 IN530EF IN530EM
4P 5W 3ØY
347/600V
HBL530R5W HBL530P5W HBL530C5W HBL530B5W BB2030N BB201W
BB301W PC530 IN530EF IN530EM
32 2P 3W 100-130V
HBL332R4WHBL332P4WHBL332C4WHBL332B4WBB2030N BB201W
BB301W PC3430 IN330BF IN330BM
2P 3W 220-240V
HBL332R6W HBL332P6W HBL332C6W HBL332B6W BB2030N BB201W
BB301W PC3430 IN330BF IN330BM
3P 4W 380-415V
HBL432R6W HBL432P6W HBL432C6W HBL432B6W BB2030N BB201W
BB301W PC3430 IN430DF IN430DM
3P 4W 380V 50Hz
440V 60Hz
HBL432R3W HBL432P3W HBL432C3W HBL432B3WBB2030N BB201W
BB301W PC3430 IN430DF IN430DM
4P 5W 220/380V
240/415V
HBL532R6W HBL532P6W HBL532C6W HBL532B6W BB2030N BB201W
BB301W PC530 IN530EF IN530EM
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
See page G-11 for closure caps, purchased separately. PC320, PC420, PC520, PC3430, PC530 are not UL or CSA.
Consult factory.
IEC Pin and Sleeve
Watertight Devices
20 and 30 Ampere – North American Ratings, 16 and 32 Ampere – International Ratings
RoHS
IP67
SUITABILITY
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-7www.hubbell-wiring.com Wiring Device-Kellems
®
Rating Watertight Devices Accessories Replacement Interiors
Amps
Poles
and
Wires
Configuration
Recep./ Plug/
Conn. Inlet AC Voltage Receptacle Plug
Connector
Inlet
Back Boxes
Non -Metallic Metallic
Closure
Caps
Recep./
Conn.
Plug/
Inlet
60 2P 3W
125V
HBL360R4W HBL360P4W HBL360C4W HBL360B4W BB60N BB601W
BB602W PC60 IN360AF IN360AM
2P 3W
250V
HBL360R6W HBL360P6W HBL360C6W HBL360B6W BB60N BB601W
BB602W PC60 IN360BF IN360BM
2P 3W
480V
HBL360R7W HBL360P7W HBL360C7W HBL360B7W BB60N BB601W
BB602W PC60 IN360BF IN360BM
3P 4W
125/250V
HBL460R12W HBL460P12W HBL460C12W HBL460B12W BB60N BB601W
BB602W PC60 IN460CF IN460CM
3P 4W
3Ø 250V
HBL460R9W HBL460P9W HBL460C9W HBL460B9W BB60N BB601W
BB602W PC60 IN460DF IN460DM
3P 4W
3Ø 480V
HBL460R7W HBL460P7W HBL460C7W HBL460B7W BB60N BB601W
BB602W PC60 IN460DF IN460DM
3P 4W
3Ø 600V
HBL460R5W HBL460P5W HBL460C5W HBL460B5W BB60N BB601W
BB602W PC60 IN460DF IN460DM
4P 5W
3ØY
120/208V
HBL560R9W HBL560P9W HBL560C9W HBL560B9W BB60N BB601W
BB602W PC60 IN560EF IN560EM
4P 5W
3ØY
277/480V
HBL560R7W HBL560P7W HBL560C7W HBL560B7W BB60N BB601W
BB602W PC60 IN560EF IN560EM
4P 5W
3ØY
347/600V
HBL560R5W HBL560P5W HBL560C5W HBL560B5W BB60N BB601W
BB602W PC60 IN560EF IN560EM
63 2P 3W
220-240V
HBL363R6W HBL363P6W HBL363C6W HBL363B6W BB60N BB601W
BB602W PC60 IN360BFS IN360BMS
3P 4W
380-415V
HBL463R6W HBL463P6W HBL463C6W HBL463B6W BB60N BB601W
BB602W PC60 IN460DFS IN460DMS
4P 5W
220/380V
240/415V
HBL563R6W HBL563P6W HBL563C6W HBL563B6W BB60N BB601W
BB602W PC60 IN560EFSIN560EMS
100 2P 3W
125V
HBL3100R4W HBL3100P4W HBL3100C4W HBL3100B4W BB100N BB1001W
BB1002W PC100 IN3100AF IN3100AM
2P 3W
250V
HBL3100R6W HBL3100P6W HBL3100C6W HBL3100B6W BB100N BB1001W
BB1002W PC100 IN3100BF IN3100BM
2P 3W
480V
HBL3100R7W HBL3100P7W HBL3100C7W HBL3100B7W BB100N BB1001W
BB1002W PC100 IN3100BF IN3100BM
3P 4W
125/250V
HBL4100R12W HBL4100P12W HBL4100C12W HBL4100B12W BB100N BB1001W
BB1002W PC100 IN4100CFIN4100CM
3P 4W
3Ø 250V
HBL4100R9W HBL4100P9W HBL4100C9W HBL4100B9W BB100N BB1001W
BB1002W PC100 IN4100DF IN4100DM
3P 4W
3Ø 480V
HBL4100R7W HBL4100P7W HBL4100C7W HBL4100B7W BB100N BB1001W
BB1002W PC100 IN4100DF IN4100DM
3P 4W
3Ø 600V
HBL4100R5W HBL4100P5W HBL4100C5W HBL4100B5W BB100N BB1001W
BB1002W PC100 IN4100DF IN4100DM
4P 5W
3ØY
120/208V
HBL5100R9W HBL5100P9W* HBL5100C9W HBL5100B9W BB100N BB1001W
BB1002W PC100 IN5100EF IN5100EM
4P 5W
3ØY
277/480V
HBL5100R7W HBL5100P7W HBL5100C7W HBL5100B7W BB100N BB1001W
BB1002W PC100 IN5100EF IN5100EM
4P 5W
3ØY
347/600V
HBL5100R5W HBL5100P5W HBL5100C5W HBL5100B5W BB100N BB1001W
BB1002W PC100 IN5100EF IN5100EM
125 2P 3W
220-240V
HBL3125R6W HBL3125P6W HBL3125C6W HBL3125B6W BB100N BB1001W
BB1002W PC100 IN3100BFSIN3100BMS
3P 4W
380-415V
HBL4125R6W HBL4125P6W HBL4125C6W HBL4125B6W BB100N BB1001W
BB1002W PC100 IN4100DFS IN4100DMS
4P 5W
220/380V
240/415V
HBL5125R6W HBL5125P6W HBL5125C6W HBL5125B6W BB100N BB1001W
BB1002W PC100 IN5100EFS IN5100EMS
Note: See page G-10 and G-11 for back boxes and accessories, G-12 and G-13 for product dimensions, G-14 and G-15 for product specifications and HP ratings.
All 63A and all 125A devices have pilot pins or contacts.
See page G-11 for closure caps, purchased separately. PC60 and PC100 are not UL or CSA.
*See page G-12 for additional information on short housing plug. IP22 suitability - length 8.30" (210.8).
Consult factory.
IEC Pin and Sleeve
Watertight Devices
60 and 100 Ampere – North American Ratings, 63 and 125 Ampere – International Ratings
RoHS
IP67
SUITABILITY
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-8 Wiring Device-Kellems
®
IEC Pin and Sleeve
Corrosion Resistant Devices
100 Ampere Devices
Devices that Withstand the Most Abusive Environments
Hubbell offers a superior grade of 100A IEC Pin and Sleeve designed for use in the most demanding environments. These
devices feature nickel plated solid brass pins for long life and reliable electrical contact in the most corrosive environments.
They have a high visibility yellow supertough nylon housing. The heavy duty external cord clamps provide maximum cord
retention to maintain secure terminations. The screws and fasteners are made from stainless steel.
• Food Processing
• Factory
• Water Treatment
• Washdown
• Temporary Power
• Meat Packing
• Construction
• Agriculture
• Outdoor Entertainment
Standard Service
Rating Watertight Devices Accessories
Amps
Poles
And
Wires
Conguration
Recep./
Conn. Plug AC Voltage Receptacle Plug Connector
Back Boxes
Non -Metallic Metallic
Closure
Caps
100 3P 4W 125/250V M4100R12 M4100P12 M4100C12
BB100N BB1001W
BB1002W PC100
4P 5W 3ØY
120/208V M5100R9 M5100P9 M5100C9
BB100N BB1001W
BB1002W PC100
4P 5W 3ØY
277/480V M5100R7 M5100P7 M5100C7
BB100N BB1001W
BB1002W PC100
"Reverse Service"
Rating Watertight Devices Accessories
Amps
Poles
And
Wires
Conguration
Conn. Inlet AC Voltage Inlet Plug Connector
Back Boxes
Non -Metallic Metallic
Closure
Caps
100 3P 4W 125/250V M4100B12R M4100C12R
BB100N BB1001W
BB1002W PC100
4P 5W 3ØY
120/208V M5100B9R M5100C9R
BB100N BB1001W
BB1002W PC100
4P 5W 3ØY
277/480V M5100B7R M5100C7R
BB100N BB1001W
BB1002W PC100
Note: See page Z-17 for corrosion resistant cord sets.
IP67
SUITABILITY
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-9www.hubbell-wiring.com Wiring Device-Kellems
®
IEC Pin and Sleeve
Data Center Pin and Sleeve
DC Rated Pin and Sleeve Devices
In today’s environmentally conscious world, energy savings is a pinnacle part of going green.
DC (Direct Current) is being used to reduce power consumption and decrease the amount of
infrastructure needed to energize specific types of data center equipment. Electrical devices
provide a means of connecting DC power.
Hubbell is the first manufacturer to introduce a series of IEC Pin and Sleeve devices
configured for the UL1686 eight o’clock ground position for DC voltage (Disconnecting use
only). Hubbell’s IEC DC rated pin and sleeve line has been qualified by UL to the requirements
of DC voltage. The thermoset polyester contact carrier provide high resistance to electrical
tracking, it withstands higher temperatures for this type of demanding application. The solid
one-piece pins are machined from solid brass for longer life and reliable electrical contact.
In addition, the heavy-duty external cord grips provide maximum cord retention to maintain
secure terminations. Finally, the super tough, color coded, non-conductive V-0 rated Valox®
housing is heavy duty for safety and protecting the internal components.
Dual Certified Pin and Sleeve Devices
Hubbell’s dual certified pin and sleeve devices are ideal for the data center and high tech server industry. They are UL Listed
to UL1682 for the North American market and are TUV Rheinland Certified for the European and International market.
Customers can use the same plug and connector for multiple electrical configurations. They reduce the number of SKU’s
end users have to use if they sell to both domestic and overseas customers. These devices are IP67 rated, RoHs compliant
and showcase all the inherent safety benefits of their V-0 rated Valox® housing and internal components.
IP67
SUITABILITY
IP67
SUITABILITY
Rating Watertight Devices
Amps
Poles
And
Wires
Conguration
Recep./
Conn. Plug DC Voltage
Receptacle
Plug
Connector
30 2P 3W 550V HBL330R8WDC HBL330P8V0DC HBL330C8V0DC
60 2P 3W 550V HBL360R8WDC* HBL360P8V0DC HBL360C8V0DC
100 2P 3W 550V HBL3100R8WDC HBL3100P8V0DC HBL3100C8V0DC
4P 5W 400V HBL5100R8WDC HBL5100P8V0DC HBL5100C8V0DC
Note: *Inlet available - HBL360B8WDC.
Rating Watertight Devices
Amps
Poles
And
Wires
Conguration
Recep./
Conn. Plug AC Voltage Receptacle Plug Connector
Inlet
30/32 3P 4W 380-415V HBL430R6V02 HBL430P6V02 HBL430C6V02 HBL430B6V02
4P 5W 200/346V
240/415V HBL530R6V02 HBL530P6V02 HBL530C6V02 HBL530B6V02
60/63 3P 4W 380-415V HBL460R6V02 HBL460P6V02 HBL460C6V02 HBL460B6V02
4P 5W 200/346V
240/415V HBL560R6V02 HBL560P6V02 HBL560C6V02 HBL560B6V02
RoHS
RoHS
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-10 Wiring Device-Kellems
®
AA2030PS
HBL2030AP
FW60100
FT202W
FW6010055
BB601W
BB60N
IEC Pin and Sleeve
Back Boxes
Back Boxes
Hubbell manufactures an extensive line of back boxes for use with IEC Pin and Sleeve devices. Each
back box is designed to give the user the maximum amount of wiring room while achieving grounding to
metallic conduit. Hubbell back boxes are available in non-metallic and cast metal versions.
Non-Metallic 15º Angle Back Box
Description NPT Hub Size* Catalog Number
Back box for 16, 20, 30 and 32A devices. 1" BB2030N
Back box for 60 and 63A devices. 1¼" BB60N
Back box for 100 and 125A devices. 1½" BB100N
Note: *Hub is not included; order one of the following Raco® part numbers: 1 in. = 1704, 1¼ in. = 1705, 1½ in. = 1706.
These boxes meets IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box**
Description NPT Hub Size Catalog Number
Back box for 16, 20, 30 and 32A devices. ¾" BB201W
1" BB301W
Back box for 60 and 63A devices. 1¼" BB601W
1½" BB602W
Back box for 100 and 125A devices. 1½" BB1001W
2" BB1002W
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Metallic 55º Angle Back Box and Adapter**
Description NPT Hub Size Catalog Number
Feed-thru box back box and adapter for 16, 20, 30 and 32A devices. 1" AB203055
Angle adapter only. AA203055
Back box and adapter for 60, 63, 100 and 125A devices. 1½" FW6010055
Angle adapter only. AA6010055
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Metallic Feed-Thru Back Box**
Description NPT Hub Size Catalog Number
Feed-thru box for 16, 20, 30 and 32A devices. ¾" FT202W
1" FT302W
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Metallic Four-Way 15º Angle Back Box**
Description NPT Hub Size Catalog Number
Four-way box for 60, 63, 100 and 125A devices. 1½" FW60100
Note: **These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
Straight Wall Box Adapter
Description Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
2-gang, device boxes and FD boxes.
HBL2030AP
Angle Wall Box Adapter
Description Catalog Number
Adapts 16, 20, 30 and 32A Watertight IEC Pin and Sleeve devices to
standard wall boxes.
AA2030PS
Note: Adapts 20 and 30A Watertight Pin and Sleeve receptacle to single, 2-gang standard wall box and 4 or 4¹¹⁄₁⁄⁄ inch
square for non-watertight applications.
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-11www.hubbell-wiring.com Wiring Device-Kellems
®
074093403
SAB34
CA3430
PC3430
CC3430
LR3430
IEC Pin and Sleeve
Accessories
Closure Caps
Cap assemblies provide watertight sealing to a disconnected male IEC Pin and Sleeve plug or inlet.
Manufactured of the same tough non-metallic material as the watertight IEC Pin and Sleeve devices
for corrosion and abuse resistance.
Description Catalog Number
Fits all 16 and 20A, 3 wire plugs and inlets.
Fits all 16 and 20A, 4 wire plugs and inlets.
Fits all 16 and 20A, 5 wire plugs and inlets.
PC320
PC420
PC520
Fits all 30 and 32A, 3 and 4 wire plugs and inlets.
Fits all 30 and 32A, 5 wire plugs and inlets.
PC3430
PC530
Fits all 60 and 63A plugs and inlets. PC60
Fits all 100 and 125A plugs and inlets. PC100
Cover Assemblies
Replacement cover assemblies for use with watertight connector bodies and receptacles.
Kit contains cover, arm assembly and installation tool.
Description Catalog Number
Fits all 16 and 20A, 3 wire watertight female devices.
Fits all 16 and 20A, 4 wire watertight female devices.
Fits all 16 and 20A, 5 wire watertight female devices.
CA320
CA420
CA520
Fits all 30 and 32A, 3 and 4 wire watertight female devices.
Fits all 30 and 32A, 5 wire watertight female devices.
CA3430
CA530
Fits all 60 and 63A watertight female devices. CA60
Fits all 100 and 125A watertight female devices. CA100
Cord Clamp and Locking Ring
Replacement cord clamp and locking ring for use with IEC plugs, connectors and inlets.
Description
Cord Clamp and
Locking Ring Locking Ring Only
Fits all 16 and 20A, 3 wire plugs, connectors and inlets.
Fits all 16 and 20A, 4 wire plugs, connectors and inlets.
Fits all 16 and 20A, 5 wire plugs, connectors and inlets.
CC320
CC420
CC520†
LR320*
LR420*
LR520*
Fits all 30 and 32A, 3 and 4 wire plugs, connectors and inlets.
Fits all 30 and 32A, 5 wire plugs, connectors and inlets.
CC3430
CC530†
LR3430*
LR530*
Fits all 60 and 63A plugs, connectors and inlets. CC60 LR60*
Fits all 100 and 125A plugs, connectors and inlets. CC100 LR100*
Note: *Locking Ring only for plugs and inlets.
Consult factory.
Liquidtight Adapters
Machined aluminum adapters are available to provide a means for attaching flexible liquidtight metal
conduit to rear of a Hubbell Pin and Sleeve plug or connector. To install, remove cord grip and two gland
cap screws. Use screws to attach adapter. Kellems® liquidtight conduit connectors are available to control
arc of bend and to prevent conduit pull-out where vibration, motion or strain is present. These grips
interface directly with Hubbell’s liquidtight adapters and are available in a wide variety of NPT sizes and
configurations. Consult your local code grounding requirements before using liquidtight adapters.
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell Liquidtight
Adapter
Optional Kellems
Liquidtight Conduit Grip
16 and 20 Amp
3 and 4 Wire
½" NPT SA A12 074093402
¾" NPT SAA34 074093403
16 and 20 Amp 5 wire
and 30 and 32 Amp
3 and 4 wire
½" NPT SAB12 074093402
¾" NPT SAB34 074093403
1" NPT SAB100 074093404
30 and 32 Amp 5 wire ¾" NPT SAC34 074093403
30 and 32 Amp 5 wire
and 60 and 63 Amp (all)
1" NPT SAC100 074093404
1¼" NPT SAC125 074093405
100 and 125 Amp (all) 1¼" NPT SAD125 074093405
1½" NPT SAD150 074093406
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-12 Wiring Device-Kellems
®
IEC Pin and Sleeve
Dimensions
⁷⁄₃₂
" (5.5) Dia. (4 Holes)
F
E
A
BC
D
Receptacle
B D
AC
E
F
⁷⁄₃₂
" (5.5) Dia. (4 Holes)
Inlet
B
A
Connector Body
B
A
Plug
B
A
Short Housing Plug
Plug Dimensions
Type A B Cord Grip Range
HBL320P 6.61" (167.8) 2.87" (73.0) .330"-.830" (8.4-21.1)
HBL420P 7.0 0 " (177.8) 3.19" (81.0) .330"-.830" (8.4-21.1)
HBL520P 7.65" (19 4 . 3) 3.50" (89.0) .330"-.830" (8.4-21.1)
HBL330P 8.05" (204.5) 3.74" (95.0) .375"-1.250" (9.5-31.8)
HBL430P 8.05" (204.5) 3.74" (95.0) .375"-1.250" (9.5-31.8)
HBL530P 8.54" (216.9) 4.02" (102.0) .500"-1.450" (12.7-36.8)
HBL360P, HBL460P, HBL560P 10.15" (257. 8 ) 4.49" (114.0) .500"-1.450" (12.7-36.8)
HBL3100P, HBL4100P, M4100P,
HBL5100P, M5100P
12.63" (320.8) 4.92" (125.0) 1.065"-1.940" (27.1-49.3)
Short Housing Plug Dimensions
Type A B Cord Grip Range
HBL5100P9WSH 8.30" (210.82) 4.92" (125.0) 1.065"-1.940" (27.1-49.3)
Connector Body Dimensions
Type A B Cord Grip Range
HBL320C 7.4 9 " (19 0. 3 ) 3.33" (84.6) .330"-.830" (8.4-21.1)
HBL420C 7.90" (200.6) 3.66" (93.0) .330"-.830" (8.4-21.1)
HBL520C 8.54" (216.9) 3.94" (100.0) .330"-.830" (8.4-21.1)
HBL330C 9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL430C 9.05" (229.9) 4.27" (108.5) .375"-1.250" (9.5-31.8)
HBL530C 9.68" (245.8) 4.70" (119.5 ) .500"-1.450" (12.7-36.8)
HBL360C, HBL460C, HBL560C 11.15" (28 3.2) 5.10" (12 9.5) .500"-1.450" (12.7-36.8)
HBL3100C, HBL4100C, M4100C,
HBL5100C, M5100C
13.57" (344.7) 5.71" (145) 1.065"-1.940" (27.1-49.3)
Inlet Dimensions
Type A B C D E F
HBL320B 2.54" (64.5) 1.8 5" (47.0 ) 1.14" (29.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL420B 2.54" (64.5) 2.11" (53.6) 1.14" (29.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL520B 2.54" (64.5) 2.41" (61.2) 1.14" (29.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL330B 2.99" (76.0) 2.49" (63.2) 1.04" (26.5) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL430B 2.99" (76.0) 2.49" (63.2) 1.04" (26.5) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL530B 2.99" (76.0) 2.75" (69.9) 1.04" (26.5) 2.80" (71.0) 3.75" (95.3) 3.13" (79.5)
HBL360B,
HBL460B, HBL560B
4.04" (102.6) 2.97" (75.5) 1.18" (30.0) 3.46" (88.0) 4.50" (114.3) 3.88" (98.5)
HBL3100B,
HBL4100B, M4100B,
HBL5100B, M5100B
4.53" (115) 3.44" ( 87.5) 1.95" (49.5) 3.94" (100.0) 5.50" (139.7) 4.88" (124.0)
Receptacle Dimensions
Type A B C D E F
HBL320R 3.33" (84.5) 2.78" (70.6) 1.02" (26.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL420R 3.66" (93.0) 2.78" (70.6) 1.02" (26.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL520R 3.94" (100.0) 2.78" (70.6) 1.02" (26.0) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL330R 4.27" (108.5) 3.09" (78.5) 1.16" (29.5) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL430R 4.27" (108.5) 3.09" (78.5) 1.16" (29.5) 2.72" (69.0) 3.75" (95.3) 3.13" (79.5)
HBL530R 4.70" (119.4) 3.09" (78.5) 1.16" (29.5 ) 2.83" (71.9) 3.75" (95.3) 3.13" (79.5)
HBL360R,
HBL460R, HBL560R
5.10" (129.5 ) 4.07" (103.4) 1.69" (43.0) 3.46" (88.0) 4.50" (114.3) 3.88" (98.6)
HBL3100R,
HBL4100R, M4100R,
HBL5100R, M5100R
5.71" (145) 4.23" (107.4) 2.46" (62.5) 3.95" (100.3) 5.50" (139.7) 4.88" (123.9)
Note: 20, 30, 60 and 100A devices are dimensionally equivalent to 16, 32, 63 and 125A devices, respectively.
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-13www.hubbell-wiring.com Wiring Device-Kellems
®
IEC Pin and Sleeve
Dimensions
F
C
A
15°
Non-Metallic Angle Box
A
B
F
E
D
C
15°
Metallic 15º Angle Box
41
A
B
E
D
C
55°
Metallic 55º Angle Box
48 CU. IN.
BD
E
A
CF
Metallic Feed-Thru Box
Metallic Four-Way Angle Box
A
B
C
D
E
Non-Metallic 15º Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity Catalog
Number
Back box for 16, 20,
30 & 32A devices.
1" 5.67"
(144.0)
4.44"
(112.8)
4.05"
(102.9)
3.91"
(99.3)
2.35"
(59.7)
4.92"
(125.0)
30.00" BB2030N
Back box for 60
& 63A devices.
1¼" 7.76 "
(197. 0 )
5.16"
(131.0)
5.87"
(149.0)
4.72"
(120.0)
2.99"
(76.0)
6.94"
(176.0)
70.00" BB60N
Back box for 100
& 125A devices.
1½" 8.21"
(209.0)
6.23"
(158.0)
6.31"
(160.3)
5.71"
(145.0)
3.99"
(101.0)
7.41"
(188.0)
120.00" BB100N
Note: *Hub is not included; order one of the following Raco® part numbers: 1 inch = 1704, 1¼ inch = 1705, 1½ inch = 1706.
These boxes meet IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
Metallic 15º Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity Catalog
Number
Back box for 16, 20,
30 & 32A devices.
¾" 5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00" BB201W
Back box for 16, 20,
30 & 32A devices.
1" 5.12"
(130.2)
4.00"
(101.6)
4.19"
(106.4)
3.75"
(95.3)
3.00"
(76.2)
4.00"
(101.6)
30.00" BB301W
Back box for 60
& 63A devices.
1¼" 7.2 5"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(15 7. 2)
80.00" BB601W
Back box for 60
& 63A devices.
1½" 7.2 5"
(184.2)
5.25"
(133.4)
6.00"
(152.4)
4.50"
(114.3)
3.75"
(95.3)
6.19"
(15 7. 2)
80.00" BB602W
Back box for 100
&125A devices.
1½" 8.12"
(206.4)
6.75"
(171.5)
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00" BB1001W
Back box for 100
& 125A devices.
2" 8.12"
(206.4)
6.75"
(171.5)
6.88"
(174.6)
5.50"
(139.7)
4.75"
(120.7)
6.94"
(176.2)
130.00" BB1002W
Metallic 55º Angle Back Box and Adapter
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity Catalog
Number
Feed-thru box and
angle adapter for 16,
20, 30 & 32A devices.
1" 6.80"
(172.4)
6.60"
(167. 0 )
5.63"
(142.9)
4.50"
(114.3)
3.74"
(95.0)
42.27" AB203055
Angle adapter for 16,
20, 30 & 32A devices.
4.89"
(124.3)
3.33"
(84.6)
4.29"
(109.0)
3.75"
(95.2)
2.50"
(63.5)
25.00" AA203055
Back box and angle
adapter for 60, 63,
100 & 125A devices.
1½" 8.50"
(215.9)
8.00"
(202.9)
7.75"
(196.8)
6.90"
(174.8)
6.00"
(152.4)
100.00" FW6010055
Angle adapter for 60,
63, 100 & 125A devices.
6.75"
(171.4)
4.48"
(113.7)
6.00"
(152.4)
6.75"
(171.4)
6.00"
(152.4)
79.00" AA6010055
Metallic Feed-Thru Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity Catalog
Number
Feed-thru box for 16,
20, 30 & 32A devices.
¾" 8.25"
(209.6)
3.06"
( 7 7.8 )
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00" FT202W
Feed-thru box for 16,
20, 30 & 32A devices.
1" 8.25"
(209.6)
3.06"
( 7 7.8 )
7.14"
(181.4)
4.50"
(114.3)
3.75"
(95.3)
3.13"
(79.5)
48.00" FT302W
Metallic Four-Way 15º Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm)
Cubic
Inch
Capacity Catalog
Number
Four-way box for 60,
63, 100 & 125A devices.
1½" 8.75"
(222.3)
9.75"
( 247.7 )
7.75"
(196.9)
6.75"
(171.5)
6.00"
(152.4)
210.00" FW60100
Note: These boxes are cast aluminum, suitable for IP56 requirements and are finished with enamel paint.
These boxes withstand a 500-hour salt spray test as well as UL rain tight and external icing test.
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-14 Wiring Device-Kellems
®
IEC Pin and Sleeve
Listings and Specifications
IEC Pin and Sleeve Inlet, Connector Body, Plug and Receptacle
Watertight Materials
Part Material
Inlet
Housing Zytel® 101 Nylon*
Locking Ring Reinforced Thermoplastic Polyester
Mounting Flange Zytel® 101 Nylon
Mounting Screws Stainless Steel (300 Series)
Contact Carrier High-Impact Thermoset
Retainer High-Impact Thermoset
Ground, Phase Pins Brass (M-Series - Nickel-plated brass)
Terminal Screws Stainless Steel (300 Series)
Assembly Screws (2) Stainless Steel (300 Series)
Gaskets Solid Neoprene
Connector Body
Housing Zytel® ST801 Nylon
Cord Clamps Reinforced Thermoplastic Polyester
Glands Solid Neoprene
Cover Arms Reinforced Thermoplastic Polyester
Arm Springs Stainless Steel (17-7 type)
Covers Reinforced Thermoplastic Polyester
Cover Screw Nickel-plated brass
Rotating Sealing Disc Polycarbonate
Gaskets Solid Neoprene
Contact Carrier High-Impact Thermoset
Retainer High-Impact Thermoset
Phase, Ground Sleeves Brass
Sleeve Spring 20A and 30A Stainless Steel (300 Series); others are Beryllium Copper
multi-contact inserts with silver plating
Terminal Screws Stainless Steel (300 Series)
Assembly Screws Stainless Steel (300 Series)
Plug
Housing Zytel® ST801 Nylon
Locking Ring Reinforced Thermoplastic Polyester
Sealing Gasket Solid Neoprene
Cord Clamp Reinforced Thermoplastic Polyester
Gland Cap Reinforced Thermoplastic Polyester
Gland Solid Neoprene
Cord Clamp Screws Stainless Steel (300 Series)
Clamp Nut Nickel-Plated Brass
Gland Clamp Screws Stainless Steel (300 Series)
Contact Carrier High-Impact Thermoset
Retainer High-Impact Thermoset
Ground, Phase Pins Brass (M-Series - Nickel-plated brass)
Terminal Screws Stainless Steel (300 Series)
Assembly Screws Stainless Steel (300 Series)
Receptacle
Housing Zytel® 101 Nylon
Mounting Flange Zytel® 101 Nylon
Arm Spring Stainless Steel (17-7 type)
Cover Arm Reinforced Thermoplastic Polyester
Cover Reinforced Thermoplastic Polyester
Cover Screw Nickel-plated brass
Rotating Sealing Disc Polycarbonate
Gaskets Solid Neoprene
Mounting Screws Stainless Steel (300 Series)
Terminal Screws Stainless Steel (300 Series)
Phase, Ground Sleeves Brass
Sleeve Spring 20A and 30A Stainless Steel (300 Series); others are Beryllium Copper multi-contact inserts with silver plating
Specifications
Typical Specification
Manufacturer’s Identification Hubbell HBL520P9W
Description Plug, Power Supply
Type 3 Pole + Neutral + Earth
Rating 20A, 120/208V AC, 3 Phase WYE
Configuration UL 1686 C2, IEC 60309-2, Clock Position 9, Watertight
Certification UL Listed, File E146032 Receptacles and Inlets, E146033 Plugs and Connectors,
UL Standard UL1682 and UL 1686C2, CSA Certified File LR280C for Plugs,
Connectors Inlets and LR285C for Receptacle CSA StandardC22.2 No. 182.1,
UL Classified to IEC 60309-1 IEC 60309-2
Note: *All devices on page G-9 have Valox® housings.
® Zytel is registered trademark of E.I. DuPont.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Listed to standard UL1682/CSA C22.2
No. 182.1-02, Plugs, Receptacles and
cable connectors of the Pin and Sleeve
Type.
UL Classified to IEC Standards 60309-
1 (Plugs, Socket Outlets, and Couplers
for Industrial Purposes) for Series I
(European) rated voltages and services.
When used with cord, these devices
require no further investigation by UL
for equipment Classification to IEC 435
or IEC 380.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-15www.hubbell-wiring.com Wiring Device-Kellems
®
Performance
Electrical
Dielectric Withstand Voltage 3000V AC.
Max. Working Voltage 600V RMS (i.e., minimum creepage distance 10 millimeters, minimum clearance 8 millimeters, per IEC 60309-1
for devices rated over 500V).
Current Interrupting Certified for current interrupting at full rated current (Except DC rated devices).
Temperature Rise Max. 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power
factor of 75%.
Endurance 5,000 connect and disconnect cycles with load for 16A and 20A, 1,000 cycles with load and 1,000 cycles without
load for 30A, 32A, 60A and 63A, and 250 cycles with load and 250 cycles without load for 100A and 125A.
Mechanical
Impact Resistance Per CSA C22.2 No. 182.1 / UL1682.
Cord Grip Cable Retention Per CSA C22.2 No. 182.1 / UL1682.
Cord Accommodation Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62,
CSA C22.2 No. 49 and the harmonized <HAR> European Standards.
Terminal Identification Terminals identified in accordance with North American and IEC conventions.
Product Identification Identification and ratings are a permanent part of the device housing.
Environmental
Moisture Resistance Watertight per IEC 60309-1.
Ingress Protection IP67 Suitability.
Flammability HB or better per UL 94 or CSA C22.2 No. 0.17.
Operating Temperatures Maximum Continuous 75°C; Minimum - 40°C without impact.
Materials
Housings Nylon.
All Other Materials Resistant to corrosion and chemical attack.
Note: Specification sheets for all other Pin and Sleeve catalog numbers are available upon request.
IEC Pin and Sleeve
Specifications and Horsepower Ratings
Horsepower Ratings for IEC Pin and Sleeve
AC Voltage Rating Horsepower Catalog Number
250 2HBL420R9W HBL420P9W HBL420C9W HBL420B9W
3Ø 480 5 HBL420R7W HBL420P7W HBL420C7W HBL420B7W
3Ø 600 7.5 HBL420R5W HBL420P5W HBL420C5W HBL420B5W
Y 120/208 .5 HBL520R9W HBL520P9W HBL520C9W HBL520B9W
3Ø Y 277/480 5HBL520R7W HBL520P7W HBL520C7W HBL520B7W
3Ø Y 347/600 7.5 HBL520R5W HBL520P5W HBL520C5W HBL520B5W
250 3HBL430R9W HBL430P9W HBL430C9W HBL430B9W
3Ø 480 7.5 HBL430R7W HBL430P7W HBL430C7W HBL430B7W
3Ø 600 10 HBL430R5W HBL430P5W HBL430C5W HBL430B5W
Y 120/208 2 HBL530R9W HBL530P9W HBL530C9W HBL530B9W
3Ø Y 277/480 7. 5 HBL530R7W HBL530P7W HBL530C7W HBL530B7W
3Ø Y 347/600 10 HBL530R5W HBL530P5W HBL530C5W HBL530B5W
250 5HBL460R9W HBL460P9W HBL460C9W HBL460B9W
3Ø 480 10 HBL460R7W HBL460P7W HBL460C7W HBL460B7W
3Ø 600 15 HBL460R5W HBL460P5W HBL460C5W HBL460B5W
Y 120/208 3 HBL560R9W HBL560P9W HBL560C9W HBL560B9W
3Ø Y 277/480 10 HBL560R7W HBL560P7W HBL560C7W HBL560B7W
3Ø Y 347/600 15 HBL560R5W HBL560P5W HBL560C5W HBL560B5W
250 10 HBL4100R9W HBL4100P9W HBL4100C9W HBL4100B9W
3Ø 480 30 HBL4100R7W HBL4100P7W HBL4100C7W HBL4100B7W
3Ø 600 30 HBL4100R5W HBL4100P5W HBL4100C5W HBL4100B5W
Y 120/208 10 HBL5100R9W HBL5100P9W HBL5100C9W HBL5100B9W
3Ø Y 277/480 30 HBL5100R7W HBL5100P7W HBL5100C7W HBL5100B7W
3Ø Y 347/600 30 HBL5100R5W HBL5100P5W HBL5100C5W HBL5100B5W
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-16 Wiring Device-Kellems
®
IEC Pin and Sleeve
Unfused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
The National Electrical Code (NEC®) requires a separate
disconnect means within sight of all motor loads. The NEC
requires the disconnecting means in a motor-circuit be
listed as “Suitable as Motor Disconnect” if the motor is
rated greater than 2 HP.
Hubbell’s revolutionary Circuit-Lock interlock incorporates
the disconnect switch and receptacle in one compact,
non-metallic and economical unit. Removing the plug and
locking it out provides a visual means of verifying equipment
has been disconnected. All Circuit-Lock mechanical
interlocks can be locked out as a method of compliance
with the OSHA Lockout/Tagout regulation.
The switch cannot be turned ON until the plug is completely
engaged, and the plug cannot be removed until the switch
is turned OFF. At the same time, it eliminates the possibility
of making or breaking the circuit under load or making a
casual or “lazy” connection. The non-metallic enclosure can
be connected to the metallic conduit and not interfere with
the ground continuity.
In addition, these horsepower rated units are durable,
watertight and easy to install. And they are compatible with
IEC 60309-2 plugs.
These Circuit-Lock units are available in 20, 30, 60 and
100A models, and in 3, 4 and 5 wire configurations that are
designed to the IEC 60309-1 and 60309-2 standards.
Hubbell’s Circuit-Lock Mechanical Interlocks are also
available in “Reverse Service” versions. These units
incorporate the disconnect switch and reverse service
receptacle (inlet) in one compact, non-metallic and
economical unit. These units are available in 30, 60 and
100A models, 4 wire configurations.
Hubbell Circuit-Lock® Mechanical Interlocks
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
Large gears enclosed in a
gear box assembled on one
plane to eliminate possible
gear jumping
DIN rail mounted
switch for easy
installation and
replacement
Enclosure housing with
brass inserts and stainless
steel screws for higher
torque and better sealing
Watertight conduit hub
and grounding plate for
use on metallic conduit
(IP67 suitability)
Captured neoprene
gasket for a
watertight seal
Horsepower rated
disconnect switch
handles large
motor loads
Color coded rating pad
and receptacle mount to
signify voltage
Lockable handle to
meet OSHA Lockout/
Tagout regulations
Two-stage interlocking
mechanism to help
defeat tampering
Pre-wired IEC Pin and
Sleeve receptacle
Replaceable spring-loaded
liftcover with gasket for a
watertight seal
Three molded-in
conduit drill points
are located on top,
bottom and back
surface of enclosure
Adjustable mounting
feet are ductile to
allow mounting on
irregular surfaces
HBL430MI7W
Solid pins—dependable
solid brass for longer
life and reliable
electrical contact
HBL430MI7WR
(Reverse Service)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-17www.hubbell-wiring.com Wiring Device-Kellems
®
IEC Pin and Sleeve
Unfused Circuit-Lock® Devices
20, 30, 60 and 100 Ampere – North American Ratings, 32 Ampere – International Rating
Rating
Unfused Circuit-Lock® Devices
Reverse Service
Amps
Poles
and
Wires
Configuration
Recep. Plug AC Voltage
Mechanical Interlock
Mating Plug
Mechanical Interlock
Mating Plug
20 3P 4W 120/240V HBL420MI12W HBL420P12W — —
3P 4W 3Ø 240V HBL420MI9W HBL420P9W — —
3P 4W 3Ø 480V HBL420MI7W HBL420P7W — —
3P 4W 3Ø 600V HBL420MI5W HBL420P5W — —
30 2P 3W 120V HBL330MI4W HBL330P4W —
2P 3W 240V HBL330MI6W HBL330P6W — —
2P 3W 480V HBL330MI7W HBL330P7W — —
3P 4W 120/240V HBL430MI12W HBL430P12W — —
3P 4W 3Ø 240V HBL430MI9W HBL430P9W HBL430MI9WR HBL430P9WR
3P 4W 3Ø 480V HBL430MI7W HBL430P7W HBL430MI7WR HBL430P7WR
3P 4W 3Ø 600V HBL430MI5W HBL430P5W HBL430MI5WR HBL430P5WR
4P 5W 3ØY 120/208V HBL530MI9W HBL530P9W — —
4P 5W 3ØY 277/480V HBL530MI7W HBL530P7W — —
4P 5W 3ØY 347/600V HBL530MI5W HBL530P5W — —
32 3P 4W 380V 50HZ-
440V 60Hz HBL432MI3W HBL432P3W — —
60 2P 3W 120V HBL360MI4W HBL360P4W —
2P 3W 240V HBL360MI6W HBL360P6W — —
2P 3W 480V HBL360MI7W HBL360P7W — —
3P 4W 120/240V HBL460MI12W HBL460P12W HBL460MI12WR HBL460P12WR
3P 4W 3Ø 240V HBL460MI9W HBL460P9W HBL460MI9WR HBL460P9WR
3P 4W 3Ø 480V HBL460MI7W HBL460P7W HBL460MI7WR HBL460P7WR
3P 4W 3Ø 600V HBL460MI5W HBL460P5W HBL460MI5WR HBL460P5WR
4P 5W 3ØY 120/208V HBL560MI9W HBL560P9W — —
4P 5W 3ØY 277/480V HBL560MI7W HBL560P7W — —
4P 5W 3ØY 347/600V HBL560MI5W HBL560P5W — —
100 2P 3W 240V HBL3100MI6W HBL3100P6W — —
3P 4W 120/240V HBL4100MI12W HBL4100P12W HBL4100MI12WR HBL4100P12WR
3P 4W 3Ø 240V HBL4100MI9W HBL4100P9W HBL4100MI9WR HBL4100P9WR
3P 4W 3Ø 480V HBL4100MI7W HBL4100P7W HBL4100MI7WR HBL4100P7WR
3P 4W 3Ø 600V HBL4100MI5W HBL4100P5W HBL4100MI5WR HBL4100P5WR
4P 5W 3ØY 120/208V HBL5100MI9W HBL5100P9W — —
Note: 20, 30 and 32A – 1 inch NPT hub supplied; 60 and 100A – 1¼ inch hub supplied.
IP67
SUITABILITY Enclosure Type 4X, 12
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-18 Wiring Device-Kellems
®
HBLRFT2
HBLAC1
HBLAC2
HBL30MIRS
MICPK30
CA3430MI
HBL30RGB
HBL30RNB
Dimensions
20A and 30A 60A 100A
KEY Inches (mm) Inches (mm) Inches (mm)
A 7.75" (196.9) 7.75" (196.9) 7.75" (196.9)
B 6.87" (174.5) 6.87" (174.5) 6.87" (174.5)
C 4.75" (120.7) 4.75" (120.7) 4.75" (120.7)
D 1.02" (25.9) 1.02" (25.9) 1.02" (25.9)
E 1.60" (40.6) 1.46" ( 37.1) 1.46" ( 37.1)
F 11.0 0" (279.4) 12.75" (323.9) 12.75" (323.9)
G 8.75" (222.3) 8.75" (222.3) 8.75" (222.3)
H 8.00" (203.2) 9.75" ( 247.7 ) 9.75" ( 247.7 )
I 10.12" (257.0) 11.87" (301.5) 11.87" (301.5)
J 6.88" (174.8) 6.88" (174.8) 6.88" (174.8)
K 1.93" (49.0) 2.09" (5 3.1) 2.09" (53.1)
L 11. 25" (285.8)** 13.65" (346.7) 13.65" (346.7)
M 7.75" (196.9) 8.60" (218.4) 9.30" (236.2)
HUB SIZE 1.00" NPT 1.25" NPT 1.25" NPT
Note: *Package of 10 feet and 10 screws.
**30 and 32A, 3 and 4W = 11.50" (292.1);
30A, 5W = 11.59" (294.4).
IEC Pin and Sleeve
Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Accessories and Dimensions
Auxiliary Contacts for 20, 30, 32, 60 and 100A Switch, NEMA A600 Pilot Duty
Description Catalog Number
“Break After Main Break”, 1 set of n/o contacts, 1 set of n/c contacts. HBLAC1
“Break Before Main Break, 1 set of n/o contacts. HBLAC2
Ground Block
Description Catalog Number
For 20, 30 and 32A switches. HBL30RGB
For 60 and 100A switches. HBL60100RGB
Neutral Block
Description Catalog Number
For 20, 30 and 32A switches. HBL30RNB
For 60A switches. HBL60RNB
For 100A switches. HBL100RNB
Watertight Closure Plug Kits
Description Catalog Number
For 20, 30 and 32A Circuit-Lock Unfused and Fused Pin and Sleeve mechanical interlocks. MICPK30
For 60 and 100A Circuit-Lock Unfused and Fused Pin and Sleeve mechanical interlocks. MICPK60
Replacement Flip Covers
Description Catalog Number
For 20A mechanical interlocks. CA420MI
For 30 and 32A, 3 and 4 wire mechanical interlocks. CA3430MI
For 30A, 5 wire mechanical interlocks. CA530MI
For 60A mechanical interlocks. CA60MI
For 100A mechanical interlocks. CA100MI
Replacement Switches
Description Catalog Number
For 20A mechanical interlocks. HBLDS3RS
For 30 and 32A mechanical interlocks. HBL30MIRS
For 60 and 100A mechanical interlocks. HBLDS60100RS
Replacement Mounting Feet
Description Catalog Number
For 20, 30, 32, 60 and 100A mechanical interlocks. HBLRFT2*
IH
A
B
CD
E
F
G
J
M
K
L
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-19www.hubbell-wiring.com Wiring Device-Kellems
®
Typical Specifications
Manufacturer’s Identification Hubbell HBL430MI7W
Description Circuit-Lock® Pin and Sleeve Mechanical Interlock
Electrical Type 3 Pole + Earth
Rating 30A, 480V AC, 3 Phase
Configuration IEC 60309-2, UL1686 C2, Clock position 7
Enclosure Type Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling Dirt and Noncorrosive Liquids)
Ingress Protection IP67 Suitability
Enclosure Material Non-metallic, enclosure suitable for metallic conduit
Certification UL Listed, CSA Certified
Note: This device provides on/off switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected while the
receptacle is energized. The switch cannot be turned “ON" until the plug is inserted properly, and the plug cannot be removed until the switch is turned “OFF."
Materials
Part Material Part Material
Base Valox® Top Valox®
Handle Valox® Conduit Hub Zinc
Enclosure Gasket Neoprene Shaft Valox®
Shaft Seal Neoprene Ground Plate Galvanized Steel
Enclosure Screws Stainless Steel 300 Series Enclosure Inserts Brass
Hinge Pins Nickel Plated Brass Hinge Spring Stainless Steel 300 Series
Performance
Electrical
Dielectric Voltage Withstands 3,000V AC Min.
Max. Working Voltage 600V AC RMS.
Current Interrupting Certified for current interrupting at full rated current and voltage.
Short Circuit Withstand Rating Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the
receptacle. 20A and 30A models: Suitable for use on a circuit capable of delivering not more than 65,000 RMS symmetrical
amperes, 600V when protected by class “J” fuses rated 30A.
Operations Mechanical 10,000 cycles, electrical 6,000 cycles.
Mechanical
Impact Resistance In accordance with UL 746C.
Terminal Identification In accordance with UL, CSA and international conventions.
Product Identification Identification and ratings are part of the external label and molded into the receptacle mount.
Mounting External adjustable feet.
Environmental
Moisture Resistance Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling Dirt and Noncorrosive Liquids).
Ingress Protection IP67 Suitability.
Flammability UL94-5VA and V-0 Classification.
Operating Temperature Max. Continuous +75°C; Min. Continuous -40°C.
UV Resistance All materials are UV stabilized.
IEC Pin and Sleeve
Unfused Circuit-Lock®
Specifications and Horsepower Ratings
Horsepower Ratings
Amps AC Voltage Rating Horsepower Mechanical Interlock Mating Plug
20
20
20
20
120/240V AC
3Ø 240V AC
3Ø 480V AC
3Ø 600V AC
2
5
5
10
HBL420MI12W
HBL420MI9W
HBL420MI7W
HBL420MI5W
HBL420P12W
HBL420P9W
HBL420P7W
HBL420P5W
30
30
30
30
30
30
30
30
30
30
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
Y 347/600V AC
Y 277/480V AC
Y 120/208V AC
2
3 (208-240V AC)
7.5
3 (208-240V AC)
20
15
7.5
20
15
5
HBL330MI4W
HBL330MI6W
HBL330MI7W
HBL430MI12W
HBL430MI5W
HBL430MI7W
HBL430MI9W
HBL530MI5W
HBL530MI7W
HBL530MI9W
HBL330P4W
HBL330P6W
HBL330P7W
HBL430P12W
HBL430P5W
HBL430P7W
HBL430P9W
HBL530P5W
HBL530P7W
HBL530P9W
32 380V AC 50Hz – 440V AC 60Hz 15 (440V AC 3Ø 60Hz) HBL432MI3W HBL432P3W
60
60
60
60
60
60
60
60
60
60
120V AC
240V AC
480V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
Y 347/600V AC
Y 277/480V AC
Y 120/208V AC
3
7.5 (208-240V AC)
20
7.5 (208-240V AC)
40
30
15
40
30
15
HBL360MI4W
HBL360MI6W
HBL360MI7W
HBL460MI12W
HBL460MI5W
HBL460MI7W
HBL460MI9W
HBL560MI5W
HBL560MI7W
HBL560MI9W
HBL360P4W
HBL360P6W
HBL360P7W
HBL460P12W
HBL460P5W
HBL460P7W
HBL460P9W
HBL560P5W
HBL560P7W
HBL560P9W
100
100
100
100
100
100
240V AC
120/240V AC
3Ø 600V AC
3Ø 480V AC
3Ø 250V AC
Y 120/208V AC
15 (10 @ 208V AC)
15
50
50
25 (208-240V AC)
20
HBL3100MI6W
HBL4100MI12W
HBL4100MI5W
HBL4100MI7W
HBL4100MI9W
HBL5100MI9W
HBL3100P6W
HBL4100P12W
HBL4100P5W
HBL4100P7W
HBL4100P9W
HBL5100P9W
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-20 Wiring Device-Kellems
®
IEC Pin and Sleeve
Fused Circuit-Lock® Pin and Sleeve Mechanical Interlocks
Features and Benefits
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Removable door
for ease of wiring
and installation
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Replaceable spring-loaded receptacle
liftcover with gasket ensures dust tight
rating; liftcover provides watertight seal
when turned and locked
Adjustable mounting feet (4)
can be mounted in any 1 of 3
positions for ease of installation
Three molded-in conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
The patented Plug-Check™
mechanism detects the presence
of the plug. It operates as a
clutch to engage the handle with
the switch and captures the plug.
This action prevents the plug
from being removed until the
switch is turned OFF
High visibility red handle can be
locked in the OFF position as
a method of compliance with
OSHA lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Stainless steel ¼ inch
turn door fasteners
for quick, easy
access to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door can not
be opened.
Conduit hub and mounting feet are supplied
with each IEC Mechanical Interlock
HBL460MIF5W
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-21www.hubbell-wiring.com Wiring Device-Kellems
®
Replacement Auxiliary Contacts
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
Auxiliary contact, normally open, A600 pilot duty, break before break. ACFSNO HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break. ACFSNC HBLACFSNC
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
Replacement Switches
Description
Black Style Switch
Catalog Number
Gray Style Switch
Catalog Number
For 30A fused switches. 30MIFRS HBL30MIFRS
For 60A fused switches. Gray Style switch will retro fit Black Style switch. HBL60MIFRS
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
Watertight Closure Plug Kits
Description Catalog Number
For 30A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK30
For 60 and 100A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK60
Replacement Flip Covers
Description Catalog Number
For 30A, 3 and 4 wire mechanical interlocks. CA3430MI
For 30A, 5 wire mechanical interlocks. CA530MI
For 60A mechanical interlocks. CA60MI
Replacement Mounting Feet
Description Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks. HBLRFT2
Note: Package of 10 feet and 10 screws.
IEC Pin and Sleeve
Fused Circuit-Lock® Devices and Accessories
30 and 60 Ampere – North American Ratings
Rating Fused Circuit-Lock® Devices
Amps
Poles
and
Wires
Configuration
Recep./ Plug/
Conn. Inlet AC Voltage
Mechanical Interlock
Mating Plug
30 3P 4W 120/240V HBL430MIF12W HBL430P12W
3P 4W 3Ø 240V HBL430MIF9W HBL430P9W
3P 4W 3Ø 480V HBL430MIF7W HBL430P7W
3P 4W 3Ø 600V HBL430MIF5W HBL430P5W
4P 5W 3ØY 277/480V HBL530MIF7W HBL530P7W
4P 5W 3ØY 347/600V HBL530MIF5W HBL530P5W
60 3P 4W 120/240V HBL460MIF12W HBL460P12W
3P 4W 3Ø 240V HBL460MIF9W HBL460P9W
3P 4W 3Ø 480V HBL460MIF7W HBL460P7W
3P 4W 3Ø 600V HBL460MIF5W HBL460P5W
4P 5W 3ØY 120/208V HBL560MIF9W HBL560P9W
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
HBLRFT2
MICPK30
CA3430MI
IP66
SUITABILITY
Enclosure Type 4X, 12
HBL30MIFRSHBLACFSNO
Gray Style Switch
ACFSNO 30MIFRS
Black Style Switch
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-22 Wiring Device-Kellems
®
Horsepower Ratings
Amps AC Voltage Rating Standard Maximum** Mechanical Interlock Use Pin and Sleeve Plug
30
30
30
30
30
30
3Ø 600V AC
3Ø 480V AC
3Ø 240V
120/240V AC
3Ø Y 277/480V
3Ø Y 347/600V
7.5
5
3
1.5*
5
7.5
20
15
7.5
3*
15
20
HBL430MIF5W
HBL430MIF7W
HBL430MIF9W
HBL430MIF12W
HBL530MIF7W
HBL530MIF5W
HBL430P5W
HBL430P7W
HBL430P9W
HBL430P12W
HBL530P7W
HBL530P5W
60
60
60
60
60
3Ø 600V AC
3Ø 480V AC
3Ø 240V AC
120/240V AC
Y 120/208V
15
15
7.5
3*
7.5
50
30
15
10*
15
HBL460MIF5W
HBL460MIF7W
HBL460MIF9W
HBL460MIF12W
HBL560MIF9W
HBL460P5W
HBL460P7W
HBL460P9W
HBL460P12W
HBL560P9W
Note: *208-240V AC L-L.
**Requires time delay fuses.
IEC Pin and Sleeve
Fused Circuit-Lock®
Specifications and Horsepower Ratings
Specifications Materials
Typical Specifications Part Material
Manufacturer’s Identification
Description
Electrical Type
Rating
Configuration
Enclosure Type
Certification
Hubbell HBL460MIF7W
Fused Circuit-Lock Pin and Sleeve Mechanical Interlock
3 Pole + Earth
60A, 480V AC, 3 Phase
IEC 60309-2, UL1686C2, Clock Position 7
Outdoor - 4X (Watertight, Washdown)
Indoor - 12 (Dust-tight, Falling dirt)
UL Listed for US and Canada
Base and Top
Handle
Conduit Hub
Enclosure Gasket
Shaft
Shaft Seal
Ground Plate
Enclosure Screws
Mounting Inserts
Hinge Pin
Hinge Spring
Valox®
Valox®
Zinc, 30A-1", 60A-1¼" NPT
Neoprene
Brass
Neoprene
Galvanized Steel
Stainless Steel
Brass
Nickel-Plated Brass
Stainless Steel
Note: This device provides fused switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected or the fuse
door opened while the receptacle is energized. The switch cannot be turned on until the plug is inserted properly.
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Short Circuit Withstand Rating
Operations
Withstands 3,000V AC Min.
600V AC.
Certified for current interrupting at full rated current and voltage.
Suitable for use on a circuit capable of delivering not more than 200,000 RMS symmetrical amperes
at the voltage rating of receptacle.
Mechanical 10,000 cycles minimum.
Mechanical
Impact Resistance
Terminal Identification
Product Ratings
Mounting
In accordance with UL 746C.
In accordance with UL, CSA and international conventions.
Ratings are part of the external label and molded into the receptacle mount and color-coded.
External adjustment feet.
Environmental
Moisture Resistance
Ingress Protection
Flammability
Operating Temperatures
UV Resistance
Fuse Types
Outdoor - 4X (Watertight, Washdown); Indoor - 12 (Dust-tight, Falling dirt).
IP66 Suitability.
UL94-5VA and V-0 Classification.
Max. Continuous +75°C; Min. Continuous -40°C.
All materials are UV stabilized.
UL Listed Class “J. CSA Certified HRCI-J.
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
11.46"
(291.6)
2.69" (68.3) 30A
2.83" (71.9) 60A
1.51" (38.4) 30A
1.68" (42.7) 60A
15.03"
(381.8)
7.27" (184.7)
15.36"
(390.1)
14.48"
(367.8)
12.37"
(314.2)
3.60"
(91.4)
7.19"
(182.6)
9.31" (236.5)
10.18" (258.6)
8.43" (214.1)
Dimensions
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-23www.hubbell-wiring.com Wiring Device-Kellems
®
Product Identication
Ratings and certication are
molded into the nylon housing.
Benet: Easy identication for reorder
Brass Box Terminal
Permits high clamping
pressure on conductors
without damaging wire strands
for best electrical conductivity
Solid One-Piece Pins
Solid construction. Long life,
reliable electrical contact and
maximum conductivity
Nylon Construction
Both interior and exterior are
made of tough, durable nylon
Shrouding
Recessed pins are protected
from impact and abuse
Color Coding
Quick, easy visual identication
of mating devices
Stainless Steel Terminal Screws
Resist rust and corrosion
Terminal Identication
Large markings for easy
recognition results in ease
of wiring on the assembly
line or in the eld
Split Sleeves
Split sleeves with self-adjusting stainless steel springs
assure constant contact pressure (20A and 30A).
On 60A devices, Beryllium Copper insert with multiple
contact points assures easy insertion and a tight t
Integrated Cord Grip
Limits strain on terminals,
keeps cord connected
Pin and Sleeve
20 and 30 Amps Low Profile
Features and Benefits
L420P9 L420R9
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-24 Wiring Device-Kellems
®
Rating Devices Cord Diameter
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
20 3P 4W 3Ø 250V L420P9 L420R9 .350" - .710"
(8.3 - 15.9)
30 3P 4W
125/250V
L430P12 L430R12 .390" - .775"
(9.9 - 19.7)
30 3P 4W 3Ø 250V L430P9 L430R9 .390" - .775"
(9.9 - 19.7)
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
60 3P 4W 3Ø 250V A460P9 A460R9 .75" - 1.25"
(19.1 - 31.8)
Amps
Poles
and
Wires
Conguration
Recep./ Plug/
Conn. Inlet AC Voltage
Plug
Receptacle
Min. Max.
Inches (mm)
60 4P 5W 3ØY 120/208V A560P9 HBL560R9W .89" - 1.42"
(22.6 - 36.1)
100 4P 5W 3ØY 120/208V A5100P9 HBL5100R9W 1.34" - 1.50"
(34.0 - 38.1)
Specifications
Electrical
Dielectric Withstand Voltage 3000V AC.
Max. Working Voltage 250V RMS.
Current Interrupting Certified for current interruption at full rated current.
Temperature Rise Max. 30 C temperature rise at full rated current
after 50 cycles of overload at 150% of rated
current at a power factor of 75%.
Endurance Up to 5,000 connect and disconnect cycles at
full rated current and voltage.
Mechanical
Impact Resistance Per CSA C22.2 No. 182.1 / UL1682.
Cord Grip Cable Retention Per CSA C22.2 No. 182.1 / UL1682.
Cord Accommodation Round portable service cords of diameters
commensurate with the device rating as defined
in UL standard 62, CSA C22.2 No. 49 and the
<HAR> European Standards.
Terminal Identification Terminals identified in accordance with North
American convention.
Product Identification Ratings are a permanent part of the device housing.
Environmental
Flammability HB or better per UL 94 or CSA.
C22.2 No. 0.17.
Ingress Protection IP22 Suitability
Operating Temperatures Maximum Continuous 75° C;
Minimum -40°C
without
impact.
Pin and Sleeve
Low Profile Devices and Specifications
20, 30 and 60 Ampere - North American Ratings
Low Profile Devices
Application Guide
Agriculture Indoor location and maintenance.
Chemical Processing Indoor location and maintenance.
Construction Indoors for added safety and abuse
resistance.
Entertainment Indoor location and maintenance.
Food Service Food service areas where aesthetics
and space are concerns.
Light Manufacturing Indoor locations and maintenance.
Manufacturing Light assembly areas, stamping
operations and maintenance areas.
Military Warehouse and maintenance areas.
Materials
Plug Material
Case Zytel® 101 Nylon
Shroud Zytel® 101 Nylon
Pin Carrier 20 & 30A Zytel® 101 Nylon
Pin and Carrier 60A High-Impact Thermoset
Pins Brass CDA#360
Assembly Screws Stainless Steel (300 series)
Terminal Screws Stainless Steel (300 series)
Receptacle
Body Zytel® 101 Nylon
Sleeve Carrier 20 & 30A Zytel® 101 Nylon
Sleeve Carrier 60A High-Impact Thermoset
Sleeves Brass CDA #360
Assembly Screws Stainless Steel (300 series)
Terminal Screws Stainless Steel (300 series)
Adapter Plate 20 & 30A Galvanized Steel
Adapter Plate 60A Aluminum
Wall Trim Plate Zytel® 101 Nylon
Panel Mount Trim Plate Stainless Steel (300 series)
Note: See page G-25 for product dimensions.
® Zytel and Rynite are registered trademarks of E.I. DuPont Corp.
RoHS
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-25www.hubbell-wiring.com Wiring Device-Kellems
®
A
B
C
D
Angled Plugs
60A 100A
A
B
C
A
B
C
Plugs
20 and 30A
B
AC
D
20 and 30A
60A
A
B
EF
C
Wall Mount Receptacles
2.55"
(64.8)
2.55"
(64.8)
2.83"
(71.9) dia.
30A
2.13"
(54.1)
2.13"
(54.1)
2.62"
(66.5) dia.
20A
Panel Cutout
4.75" Sq.
(120.7)
20A
4.75" Sq.
(120.7)
30A
4.75" Sq.
(120.7)
60A
Mounting
2-gang box
Mounting
2-gang box
Mounting
2-gang box
and 4¹¹⁄₁₆" box
Adapter Plate (Included with “L” and “A” series receptacles)
Plug Dimensions
Type A B C D Cord Range Diameter
L420P9 2.47"
(62.7)
3.78"
(96.0)
2.93"
(74.4)
1.49"
(37.8)
.350"-.710"
(8.9-18.0)
L430P12 2.97"
(75.4)
4.18"
(106.2)
3.50"
(88.9)
1.71"
(43.4)
.390"-.775"
(9.9-19.7)
A460P9 3.38"
(85.9)
4.25"
(108.0)
7.0 0 "
(17 7. 8 )
.75"-1.25"
(19.1- 31.8)
A5100P9 4.92"
(125.00)
5.07"
(128.81)
8.60"
(218.35)
1.34"-1.50"
(3 4.0- 3 8.1)
Wall Mount Receptacle Dimensions
Type A B C D E F
L420R9 2.60"
(66.0)
2.81"
(71.4)
2.28"
(57. 9 )
2.38"
(60.5)
– –
L430R12 3.12"
(79.2)
3.12"
(79.2)
2.77"
(70.4)
2.76"
(70.1)
– –
A460R9 4.50"
(114.3)
4.50"
(114.3)
4.48"
(113.8)
3.62"
(91.9)
.50"
(12.7)
Pin and Sleeve
Low Profile Dimensions
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-26 Wiring Device-Kellems
®
Pin and Sleeve Devices
IEC Pin and Sleeve Terminal Identification
White
White
Green
Green
White
Green GreenGreen
L+
Green
L1
N
L2
White
Green
L2
N
L1
Pilot
Green
L1
L2
L3
Pilot
Green
L1
L3L2
Pilot
Green
L3
L2
L1
Green
L+
L+
L+
N
White Pilot
Green
L1
L2L3
N
White
IEC Pin and Sleeve Terminal Identification – Rear View
Description
Rating
Terminal Marking Pattern*
Receptacle and Connector Plug and Inlet
Domestic International Domestic International Domestic International
3 Wire 125V AC
277V AC 10 0-130V
3 Wire
250V AC
480V AC
600V AC
200-250V
380-415V AC
4 Wire 125/250V AC
1ØY 120/208V
4 Wire
(3Ø )
250V AC
480V AC
600V AC
380-415V AC
5 Wire
(3ØY)
120/208V AC
277/480V AC
347/600V AC
220/380V 50Hz
250/440V 60Hz
200/346V to
240/415V
50 and 60Hz
Note: *Location of grounding contact position will change as clock positions assigned to specific voltages change.
Pilot contacts supplied on 4 and 5 wire, 63 and 125 Amp international rated devices.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-27www.hubbell-wiring.com Wiring Device-Kellems
®
Ground Path
To reduce the likelihood of electrical shock, the National Electrical Code requires that non-current carrying metallic
components be grounded. Insulgrip Pin and Sleeve wiring devices offer two styles of grounding.
Style I
Receptacles achieve grounding by
attaching the ground conductor
to the ground screw inside the
back box and utilizing the metallic
receptacle shell as a ground source
(see 3P 4W Style I illustration). Plugs
and connectors establish grounding
by means of connecting the flexible
cable ground conductor to a
ground terminal within each device,
which, in turn, is grounded through
the metallic plug or connector
shroud. Any exposed metallic
components are suitably grounded
in the Style I offering.
Style II
The Style II ground path offers two
means of achieving the proper
ground path. In addition to utilizing
the same grounding method as
in the Style I product, the Style II
version incorporates a separate
ground pin and sleeve (see 3P 4W
Style II illustration). This provides a
second ground path. The ground
pin on Style II devices is longer
than other pins, meaning that
they “make first" and “break last,"
assuring protection for people and
equipment.
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Hubbell Offers Two Approaches
New Pole and Wire Terminology
Style I Style II
New Old No. of Contacts New Old No. of Contacts
2P 3W
3P 4W
4P 5W
2W 2P
3W 3P
4W 4P
2
3
4
2P 3W
3P 4W
2W 3P
3W 4P
3
4
HBL430RS1W
HBL430PS1W
HBL430RS2W
HBL430PS2W
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-28 Wiring Device-Kellems
®
Watertight Neoprene
Sealing Glands
Provide a reliable seal at
the cable entry point
Pin O-Ring Seal
Provides a watertight and
dust-tight seal around
the pins to ensure that
contamination will not
enter wire chamber
Pin Chamber
Connes arcing within the
interior chamber during
make and break cycle of
mating devices. Minimizes
arc tracking
Spring-Loaded, Gasketed Cover
Provides a UL Type 4X watertight,
dust-tight seal on connectors
and receptacles
Lid-Stay
Provides a hands-free means
of holding the cover in the open
position for engaging mating
device, troubleshooting or
maintenance purpose
Liquidtight Conduit Adapters
Machined aluminum adapters are
available to provide a means for
attaching exible liquidtight metal
conduit to rear of Hubbell Pin and
Sleeve plug or connector
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Anti-Vibration Box Terminals
Interlocking box terminals
ensure that terminal screws
remain secure and cannot
loosen. The oating box is
designed to obtain high-torque
values without damaging
stranded conductors.
Terminal Entrance Holes
Large, square funneled
entrance holes isolate
each conductor to protect
against shorts due to
stray conductor strands.
Tapered hole provides a
fast and easy guide into
the termination chamber.
Powerful Mechanical Cord Grip
Hubbell’s design incorporates two
molded-in teeth to securely grip
the outer cable jacket, and internal
conductors to prevent slippage
and strain on terminations.
Captive barrel nuts ease assembly
and allow higher tightening torque
for maximum cord retention.
Watertight Cord Entrance
The tapered bore entrance
creates high compression
forces on sealing gland,
providing a watertight seal
around cord. Individual solid
neoprene glands are supplied
to match a full range of cord
sizes and assure watertight
performance.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-29www.hubbell-wiring.com Wiring Device-Kellems
®
Locking Ring
Provides a UL Type 4X watertight
and dust-tight seal when the male
and female devices are connected
All-Brass Sleeve Contacts
Provide reliable electrical
contact with mating pins.
Ensures reliable electrical
contact with minimum heat
build-up over time
Sleeve O-Ring Seal
Provides a watertight and dust-
tight seal around the sleeves.
Assures that contamination
will not enter wire chamber
Shroud/Housing Seal
Provides a watertight
and dust-tight seal when
mated with receptacle or
connector
Terminal Screws
Combination phillips/slotted
head design
Product Marking
Catalog number and rating visible
while in use. Markings are color
coded differentiating Style I and
Style II devices
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices
Features and Benefits
Shrouded Sleeves
The shroud protects contact
sleeves from deforming from
physical abuse. The design
protects the user from the
possibility of touching live
contacts during insertion and
withdrawal of mating parts.
Beryllium Copper Spring-
Pin Design (Patented)
Maintains high unit pressure
on mating sleeves. Ensures
reliable electrical contact
while minimizing heat rise
due to normal pin wear
over time.
Thermoset Polyester
Contact Carrier
Molded thermoset polyester
provides high resistance to
electrical tracking. Withstands
higher temperatures which may
result from overload or arcing.
Thermoset properties provide
dimensional stability for this critical
assembly.
Thermoplastic Housing
Provides excellent insulating,
impact, corrosion, and
UV resistant properties.
Protects users and internal
components in the roughest
of environments.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-30 Wiring Device-Kellems
®
Rating Style I Devices Replacement Interiors
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Receptacle Plug Connector
Connector &
Receptacle
Plug
30 2P 3W 600/250 HBL330RS1W HBL330PS1W HBL330CS1W IN330FS1 IN330MS1
3P 4W 600/250 HBL430RS1W HBL430PS1W HBL430CS1W IN430FS1 IN430MS1
4P 5W 600/250 HBL530RS1W HBL530PS1W HBL530CS1W IN530FS1 IN530MS1
60 2P 3W 600/250 HBL360RS1W HBL360PS1W HBL360CS1W IN360FS1 IN360MS1
3P 4W 600/250 HBL460RS1W HBL460PS1W HBL460CS1W IN460FS1 IN460MS1
4P 5W 600/250 HBL560RS1W HBL560PS1W HBL560CS1W IN560FS1 IN560MS1
100 2P 3W 600/250 HBL3100RS1W HBL3100PS1W HBL3100CS1W IN3100FS1 IN3100MS1
3P 4W 600/250 HBL4100RS1W HBL4100PS1W HBL4100CS1W IN4100FS1 IN4100MS1
4P 5W 600/250 HBL5100RS1W HBL5100PS1W HBL5100CS1W IN5100FS1 IN5100MS1
200 3P 4W 600/250 HBL4200RS1W HBL4200PS1W HBL4200CS1W IN4200FS1IN4200MS1
4P 5W 600/250 HBL5200RS1W HBL5200PS1W HBL5200CS1W IN5200FS1IN5200MS1
Rating Style II Devices Replacement Interiors
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC Receptacle Plug Connector
Connector &
Receptacle Plug
30
2P 3W 600/250 HBL330RS2W HBL330PS2W HBL330CS2W IN330FS2 IN330MS2
3P 4W 600/250 HBL430RS2W HBL430PS2W HBL430CS2W IN430FS2 IN430MS2
60 2P 3W 600/250 HBL360RS2W HBL360PS2W HBL360CS2W IN360FS2 IN360MS2
3P 4W 600/250 HBL460RS2W HBL460PS2W HBL460CS2W IN460FS2 IN460MS2
100 2P 3W 600/250 HBL3100RS2W HBL3100PS2W HBL3100CS2W IN3100FS2 IN3100MS2
3P 4W 600/250 HBL4100RS2W HBL4100PS2W HBL4100CS2W IN4100FS2 IN4100MS2
200 2P 3W 600/250 HBL3200RS2W HBL3200PS2W HBL3200CS2W IN3200FS2IN3200MS2
3P 4W 600/250 HBL4200RS2W HBL4200PS2W HBL4200CS2W IN4200FS2IN4200MS2
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Devices - Style I and II
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating Corrosion Resistant Devices Accessories
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC Receptacle Plug Connector
Back Boxes
Angle Adapter
200 4P 5W
600/250
M5200RS1 M5200PS1 M5200CS1 MB2003W
MB2004W AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
TYPE 4X**
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-31www.hubbell-wiring.com Wiring Device-Kellems
®
Rating Style I Devices Replacement Interiors
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC Receptacle Plug Connector
Connector &
Receptacle
Plug
30 2P 3W 600/250 HBL330RS1WR HBL330PS1WR HBL330CS1WR IN330MS1 IN330FS1
3P 4W 600/250 HBL430RS1WR HBL430PS1WR HBL430CS1WR IN430MS1 IN430FS1
4P 5W 600/250 HBL530RS1WR HBL530PS1WR HBL530CS1WR IN530MS1 IN530FS1
60 2P 3W 600/250 HBL360RS1WR HBL360PS1WR HBL360CS1WR IN360MS1 IN360FS1
3P 4W 600/250 HBL460RS1WR HBL460PS1WR HBL460CS1WR IN460MS1 IN460FS1
4P 5W 600/250 HBL560RS1WR HBL560PS1WR HBL560CS1WR IN560MS1 IN560FS1
100 2P 3W 600/250 HBL3100RS1WR HBL3100PS1WR HBL3100CS1WR IN3100MS1 IN3100FS1
3P 4W 600/250 HBL4100RS1WR HBL4100PS1WR HBL4100CS1WR IN4100MS1 IN4100FS1
4P 5W 600/250 HBL5100RS1WR HBL5100PS1WR HBL5100CS1WR IN5100MS1 IN5100FS1
200 3P 4W 600/250 HBL4200RS1WR HBL4200PS1WR HBL4200CS1WR IN4200MS1IN4200FS1
4P 5W 600/250 HBL5200RS1WR HBL5200PS1WR HBL5200CS1WR IN5200MS1IN5200FS1
Rating Style II Devices Replacement Interiors
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC Receptacle Plug Connector
Connector &
Receptacle Plug
30
2P 3W 600/250 HBL330RS2WR HBL330PS2WR HBL330CS2WR IN330MS2 IN330FS2
3P 4W 600/250 HBL430RS2WR HBL430PS2WR HBL430CS2WR IN430MS2 IN430FS2
60 2P 3W 600/250 HBL360RS2WR HBL360PS2WR HBL360CS2WR IN360MS2 IN360FS2
3P 4W 600/250 HBL460RS2WR HBL460PS2WR HBL460CS2WR IN460MS2 IN460FS2
100 2P 3W 600/250 HBL3100RS2WR HBL3100PS2WR HBL3100CS2WR IN3100MS2 IN3100FS2
3P 4W 600/250 HBL4100RS2WR HBL4100PS2WR HBL4100CS2WR IN4100MS2 IN4100FS2
200 2P 3W 600/250 HBL3200RS2WR HBL3200PS2WR HBL3200CS2WR IN3200MS2IN3200FS2
3P 4W 600/250 HBL4200RS2WR HBL4200PS2WR HBL4200CS2WR IN4200MS2IN4200FS2
UL 1686 C1 Pin and Sleeve
“Reversed Service” Insulgrip® Pin and Sleeve Devices - Style I and II
30, 60, 100 and 200 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating Corrosion Resistant Devices Accessories
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC Receptacle Plug Connector
Back Boxes
Angle Adapter
200 4P 5W
600/250
M5200BS1R M5200CS1R MB2003W
MB2004W AA20045
Note: *CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design) is already in a circuit having a rating differing
from the rating of this device.
**While in use or with cover closed.
Consult factory.
Corrosion resistant cord sets are available on page Z-17 of this catalog.
TYPE 4X**
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-32 Wiring Device-Kellems
®
CC3430
074093403
MB2003W
MB601006W
MB301W
MB601003W
MB304W
SAB34
ILR1
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Accessories
Insulgrip Pin and Sleeve Metallic Back Boxes
Hubbell manufactures an extensive line of back boxes for use with UL 1686 Pin and Sleeve
devices. Each back box is designed to give the user the maximum amount of wiring room
while achieving grounding to metallic conduit.
Metallic 30º Angle Back Box*
Description Amps NPT Hub Size Catalog Number
Back box for 30A devices. 30
30
¾"
1"
MB301W
MB302W
Metallic 15º Angle Back Box*
Description Amps NPT Hub Size Catalog Number
Back box for 60A devices. 60
60
60
1"
1¼"
1½"
MB601W
MB602W
MB603W
Metallic Feed-Thru Back Box*
Description Amps NPT Hub Size Catalog Number
Straight feed-thru box for
30A devices.
30
30
¾"
1"
MB303W
MB304W
Straight feed-thru box for
60A devices.
60
60
60
1"
1¼"
1½"
MB604W
MB605W
MB606W
Metallic Four-Way Angle Back Box*
Description Amps NPT Hub Size Catalog Number
Four-way 15° angle box for
60 and 100A devices.
60/100
60/100
60/100
1¼"
1½"
2"
MB601002W
MB601003W
MB601004W
Four-way 45° angle box for
200A devices.
200
200
2"
2½"
MB2003W
MB2004W
45° Angle adapter only for
200A devices.
200 - AA20045
Metallic Four-Way Feed-Thru 15º Angle Back Box*
Description Amps NPT Hub Size Catalog Number
Four-way feed-thru, 15° angle
for 60 and 100A devices.
60/100
60/100
60/100
1¼"
1½"
2"
MB601006W
MB601007W
MB601008W
Note: *These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Replacement Cord Clamp and Locking Ring
Description Used on
Cord Clamp
Catalog Number
Locking Ring
Catalog Number
Fits all 30A plugs and connectors. All 3, 4, 5 wire CC3430 ILR1**
Fits all 60A plugs and connectors. 4 wire (Style 2) and all 5 wire CC60 ILR2**
All 3 wire and 4 wire (Style 1) CC60 ILR3**
Fits all 100A plugs and connectors. 4 wire (Style 2) and all 5 wire CC100 ILR4**
All 3 wire and 4 wire (Style 1) CC100 ILR5**
Fits all 200A plugs and connectors. All 3, 4, 5 wire CC201
Note: **Locking Ring only.
Liquidtight Adapters
Rating of Hubbell
Pin and Sleeve Device
Liquidtight
Conduit Size
Hubbell
Liquidtight Adapter
Optional Kellems
Liquidtight Conduit Grip
30 Amp ½" NPT
¾" NPT
1" NPT
SAB12
SAB34
SAB100
074093402
074093403
074093404
60 Amp 1" NPT
1¼" NPT
SAC100
SAC125
074093404
074093405
100 Amp 1¼" NPT
1½" NPT
SAD125
SAD150
074093405
074093406
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-33www.hubbell-wiring.com Wiring Device-Kellems
®
B
A
A
B
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Receptacle Dimensions
A B C D E
Amps Type Style I Style II Style I Style II Style I Style II Style I Style II Style I Style II
30 330R 2.72" (69) 2.72" (69) 3.40" (86) 3.40" (86) 3.89" (99) 3.89" (99) 3.19 " (81) 3.19" (81) 1.37" (35) 1.37" (35)
430R 2.72" (69) 2.72" (69) 3.40" (86) 3.40" (86) 3.89" (99) 3.89" (99) 3.19 " (81) 3.19" (81) 1.37" (35) 1.37" (35)
530R 2.72" (69) 3.40" (86) 3.89" (99) 3.19" (81) 1.37" (35)
60 360R 3.50" (89) 3.50" (89) 4.25" (108) 4.25" (108) 4.66" (118) 4.6 6" (118) 4.42" (112) 4.42" (112) 1.54" (39) 1.54" (39)
460R 3.50" (89) 3.50" (89) 4.25" (108) 4.25" (108) 4.66" (118) 4.6 6" (118) 4.42" (112) 4.42" (112) 1.54" (39) 1.54" (39)
560R 3.50" (89) 4.25" (108) 4.6 6" (118) 4.42" (112) 1.54" (39)
100 3100R 3.50" (89) 3.50" (89) 4.25" (108) 4.25" (108) 4.66" (118) 4.70 " (119) 5.30" (135) 5.30" (135) 1.54" (39) 1.54" (39)
4100R 3.50" (89) 3.50" (89) 4.25" (108) 4.25" (108) 4.66" (118) 4.70" (119) 5.30" (135) 5.30" (135) 1.54" (39) 1.54" (39)
5100R 3.50" (89) 4.25" (108) 4.6 6" (118) 5.30" (135) 1.54" (39)
200 3200R 6.50" (165) 7.0 0" (177 ) 5.63" (143) 7.76 " (197 ) .99" (25)
4200R 6.50" (165) 6.90" (170) 7. 0 0" (177 ) 7. 3 9 " (187 ) 5.63" (143) 5.63" (143) 7.76 " (197 ) 7.76" (197 ) .99" (25) .99" (25)
5200R 6.90" (170) 7. 3 9 " (187 ) 5.63" (143) 7.76 " (197) .99" (25)
A
B
D
C
E
30, 60 and 100 Amp
A
B
D E
C
200 Amp
Plug Dimensions
A B
Amps Type Style I Style II Style I Style II Cord Grip Range
30 330P 7.53" (191) 7.53" (191) 3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
430P 7.53" (191) 7.53" (191) 3.00" (76) 3.00" (76) .375-1.20" (9.5-30.5)
530P 7.53" (191) 3.00" (76) .375-1.20" (9.5-30.5)
60 360P 9.40" (239) 9.40" (239) 3.40" (86) 3.40" (86) .500-1.45" (12.7-36.8)
460P 9.40" (239) 9.40" (239) 3.40" (86) 3.70" (94) .50 0-1.45" (12.7-36.8)
560P 9.40" (239) 3.70" (94) .500-1.45" (12.7-36.8)
100 3100P 10.70" (272) 10.70" (272) 3.70" (94) 3.70" (94) .925-1.94" (27.0-49.3)
4100P 10.70" (272) 10.90" (277) 3.70" (94) 4.00" (102) .925-1.94" (27.0-49.3)
5100P 10.90" (277) 4.00" (102) .925-1.94" (27.0-49.3)
200 3200P 11.13" (282) 6.35" (161) 1.00-2.50" (25.4-63.5)
4200P 11.13" (282) 11.13" (282) 6.35" (161) 6.70" (170) 1.00-2.50" (25.4-63.5)
5200P 11.13" (282) 6.70" (170) 1.00-2.50" (25.4-63.5)
Connector Body Dimensions
A B
Amps Type Style I Style II Style I Style II Cord Grip Range
30 330C 8.38" (213) 8.38" (213) 3.74" (95) 3.74" (95) .375-1.20" (9.5-30.5)
430C 8.38" (213) 8.38" (213) 3.74" (95 ) 3.74" (95) .375-1.20" (9.5-30.5)
530C 8.38" (213) 3.74" (95) .375-1.20" (9.5-30.5)
60 360C 9.90" (251) 9.90" (251) 3.50" (89) 3.50" (89) .500-1.45" (12.7-36.8)
460C 9.90" (251) 10.10" (256) 3.50" (89) 3.80" (96) .500 -1.45" (12.7-36.8)
560C 10.10" (256) 3.80" (96) .500 -1.45" (12.7-36.8)
100 3100C 11.70" (297) 11.70" (297) 4.50" (114) 4.50" (114) .925-1.94" (27.0-49.3)
4100C 11.70" (297) 11.9 0" (30 2) 4.5 0" (114) 4.70" (119) .925-1.94" (27.0-49.3)
5100C 11.90" (3 02) 4.70" (119) .925-1.94" (27.0-49.3)
200 3200C 13.65" (346) 7.0 0 (177 ) 1.00-2.50" (25.4-63.5)
4200C 13.65" (346) 13.65" (346) 7.0 0" (177) 7.39 (187 ) 1.00-2.50" (25.4-63.5)
5200C 13.65" (346) 7. 3 9" (187 ) 1.00-2.50" (25.4-63.5)
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-34 Wiring Device-Kellems
®
A
B
C
E
D
F
Metallic Angle Box
A
BD
E
C
Metallic Feed-Thru Box
Metallic Four-Way Angle Box
D
E
C
A
B
Metallic Feed-Thru Angle Box
D
E
C
A
B
15°
UL 1686 C1 Pin and Sleeve
Insulgrip® Pin and Sleeve Device Dimensions
Metallic Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm) Catalog Number
30° Angle back
box for 30A
devices.
¾" 4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB301W
1" 4.87"
(124.0)
2.94"
(75.0)
4.02"
(102.0)
3.40"
(86.0)
4.25"
(108.0)
2.12"
(54.0)
MB302W
15° Angle back
box for 60A
devices.
1"
4.80"
(121.9)
5.25"
(133.4)
2.69"
(68.3)
MB601W
1¼"
4.80"
(121.9)
5.25"
(133.4)
2.69"
(68.3)
MB602W
1½"
4.80"
(121.9)
5.25"
(133.4)
2.69"
(68.3)
MB603W
Metallic Feed-Thru Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm) Catalog Number
Back box for
30A devices.
¾" 5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67. 0 )
MB303W
1" 5.35"
(136.0)
2.91"
(74.0)
4.53"
(115.0)
3.59"
(91.0)
2.62"
(67. 0 )
MB304W
Back box for
60A devices.
1" 6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
MB604W
1¼" 6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
MB605W
1½" 6.50"
(165.1)
3.80"
(97.0)
5.75"
(146.1)
4.50"
(114.3)
3.50"
(88.9)
MB606W
Metallic Four-Way Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm) Catalog Number
15° Angle four-
way box for
60 and 100A
devices.
1¼" 7. 9 2 "
(201.0)
8.52"
(216.0)
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601002W
1½" 7. 9 2 "
(201.0)
8.52"
(216.0)
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601003W
2" 7.92"
(201.0)
8.52"
(216.0)
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601004W
45° Angle four-
way box for
200A devices.
2" 10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
MB2003W
2½" 10.82"
(274.8)
9.86"
(250.4)
9.50"
(241.3)
8.17"
(207.5)
6.75"
(171.5)
MB2004W
45° Angle adapter
only for 200A devices.
8.00"
(203.2)
6.00"
(152.4)
7.0 0"
(178.0)
8.00"
(203.2)
7.0 0"
(178.0)
AA20045
Metallic Four-Way Feed-Thru 15º Angle Back Box
Description
NPT
Hub
Size
A
Inch
(mm)
B
Inch
(mm)
C
Inch
(mm)
D
Inch
(mm)
E
Inch
(mm)
F
Inch
(mm) Catalog Number
Four-way
Feed-thru box
for 60 and 100A
devices.
1¼" 7. 9 8 "
(202.7)
8.55"
( 217. 2 )
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601006W
1½" 7. 9 8 "
(202.7)
8.55"
( 217. 2 )
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601007W
2" 7.9 8"
(202.7)
8.55"
( 217. 2 )
7.0 0 "
(178.0)
6.14"
(156.0)
4.88"
(124.0)
MB601008W
Note: These boxes are cast aluminum, suitable for IP54 requirements and are finished with enamel paint.
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-35www.hubbell-wiring.com Wiring Device-Kellems
®
UL 1686 C1 Pin and Sleeve
Technical Information
Insulgrip® Pin and Sleeve Device Listings
Materials (30, 60, 100, and 200 Amp)
Plug Material
Housing Valox® 357 (200A Aluminum)
Plug Shroud Aluminum
Cord Clamps Rynite® SST35 (200A Aluminum)
Clamp Nut Nickel Plated Brass
Gland Cap Rynite® SST35
Gland Neoprene
O-Rings, Gaskets & Seals Neoprene
Contact Carrier Thermoset Polyester
Retainer Thermoset Polyester
Sleeves Brass (M-Series - Nickel-plated
tellurium copper)
Box Terminal Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff Brass
Ground Bracket Nickel Plated Spring Bronze
Locking Ring Epoxy Painted Aluminum
Connector Body
Housing Valox® 357 (200 Amp Aluminum)
Connector Shroud Epoxy Painted Aluminum
Cord Clamps Rynite® SST35
Clamp Nut Nickel Plated Brass
Gland Cap Rynite® SST35 (200A Aluminum)
Gland Neoprene
O-Rings, Gaskets & Seals Neoprene
Contact Carrier Thermoset Polyester
Retainer Thermoset Polyester
Pin Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring Beryllium Copper
Box Terminal Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff Brass
Ground Bracket Nickel Plated Spring Bronze
Cover Epoxy Painted Aluminum
Cover Arm Epoxy Painted Aluminum
Spring Guide Stainless Steel (300 Series)
Springs (Arm & Wave) Stainless Steel (300 Series)
Spring Washer Stainless Steel (300 Series)
Hinge Bushing Aluminum
Rivet Aluminum
Receptacle
Housing/Flange Epoxy Painted Aluminum
O-Rings, Gaskets & Seals Neoprene
Contact Carrier Thermoset Polyester
Retainer Thermoset Polyester
Pin Brass (M-Series - Nickel-plated
tellurium copper)
Pin Spring Beryllium Copper
Box Terminal Heat Treated & Zinc Plated Steel
Screws (Terminal, Assembly & Set) Stainless Steel (300 Series)
Ground Standoff Brass
Ground Bracket Steel
Cover Epoxy Painted Aluminum
Cover Arm Epoxy Painted Aluminum
Spring Guide Stainless Steel (300 Series)
Springs (Arm & Wave) Stainless Steel (300 Series)
Spring Washer Stainless Steel (300 Series)
Hinge Bushing Aluminum
Rivet Aluminum
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Rynite® is a registered trademark of E.I. DuPont Corp.
Typical Specification
Manufacturer’s ID Hubbell HBL430PS2W
Description Plug, Power Supply
Electrical Type 3 Pole + Earth
Max. Rating 30 Amp, 600V AC, 250V DC, 50-400Hz
Configuration UL 1686, Watertight, C1 Configuration
Certification UL Listed, UL Standard 1682, UL 50, and
UL 1010 (plugs only), CSA Certified to CSA
Spec. C22.2 No. 182.1, No. 94 and No. 159
(plugs only), UL Listed and CSA Certified Type 4X
Performance
Electrical
Dielectric Voltage Withstands 3,000V AC.
Max. Working Voltage 600V AC RMS (i.e., minimum creepage and
clearance distance of 6.4 millimeters, per UL 1682).
Current Interrupting Certified for current interrupting at full rated
current.
Temperature Rise Max. 30°C temperature rise at full rated current
after 50 cycles of overload at 150% of rated current.
Endurance Up to 1,000 connect and disconnect cycles at
full rated current and voltage.
Mechanical
Impact Resistance Per CSA C22.2, No. 182.1, UL 1682.
Cord Grip Cable Per CSA C22.2, No. 182.1, UL 1682.
Retention
Cord Accommodation Round portable service cords of diameters
commensurate with the device rating as defined
in UL. Standard 62, CSA C22.2 No. 49 and the
harmonized <HAR> European Standards.
Terminal Identification Terminals identified in accordance with UL 1686
(1, 2, 3, Green).
Product Identification Identification and ratings are permanently
fastened to the device housing.
Environmental
Hose Down & Moisture Type 3, 4, 4X per UL 50E and CSA 22.2, No. 94.
Resistance
Flammability (Enclosure) UL 94V-0 and CSA C22.2 No. 0.17.
Operating Temperatures Maximum Continuous 75°C; Minimum
-40°C without impact -25° with impact.
Hazardous Location Class I, Division I & II, Groups B, C & D and
(30, 60 & 100A) Class II, Division I & II, Groups F & G per
(plug only) UL 1010 & CSA 22.2, No. 159.
Materials
Housings Valox® 357 (200A Aluminum).
All Other Materials Resistant to corrosion and chemical attack.
Watertight Application Guide
Industry Watertight.
Agriculture Outdoor for fans, heaters, pumps, etc.
Chemical Processing Where subject to water, corrosion.
Construction Outdoors subject to severe weather conditions.
Entertainment Outdoors subject to severe weather.
Food Processing Where subject to water, corrosion.
Food Service Areas subject to wash downs & heavy cleaning.
Light Manufacturing Subjected to cleaning, solvents & chemicals.
Manufacturing Where subject to water, corrosion.
Military Outdoor construction or maintenance.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-36 Wiring Device-Kellems
®
Pin and Sleeve
Insulgrip® Mechanical Interlocks
Features and Benefits
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Removable door
for ease of wiring
and installation
Non-metallic enclosure meets UL 50E Type 4X
(watertight), 12 (dust-tight) and IP66 suitability
requirements. Enclosure is molded of rugged
thermoplastic Valox® to resist abuse, corrosion
and enhance safety. All external hardware is
stainless steel
Spring-loaded receptacle liftcover with gasket
ensures dust tight rating; liftcover provides
watertight seal when turned and locked
Adjustable mounting feet (4)
can be mounted in any 1 of
3 positions for ease
of installation
Three “molded in” conduit drill points
are located on the top, bottom, and
back surface of enclosure. Conduit
hub provided: 30A 1 inch NPT,
60A 1¼ inch NPT
The patented Plug-Check™
mechanism detects the
presence of the plug.
It operates as a clutch to
engage the handle with the
switch and captures the
plug. This action prevents
the plug from being removed
until the switch is turned OFF
High visibility red handle can
be locked in the OFF
position as a method of
compliance with OSHA
lockout requirements.
Accepts up to a ⁵⁄₁₆ inch
padlock shackle
Compact Fused Disconnect
Switch accepts Class “J” fuses.
Fuse holders are top mounted for
easy access. The switch accepts
auxiliary contacts for control circuit
applications including the ON/OFF
control of remote pilot lights or
signal for programmable controllers.
Thermoset polyester contact
carrier provides resistance
to electrical tracking and
withstands higher temperatures.
Thermoset properties provide
excellent dimensional stability,
low moisture absorption, and
superior dielectric strength.
Stainless steel ¼ turn
door fasteners for
quick, easy access
to fuses.
Enclosure door can
be locked to prevent
unauthorized access.
Additionally, if the switch
is ON, the door cannot
be opened.
Conduit hub and mounting feet are supplied
with each Insulgrip® Mechanical Interlock
HBL430MIFS2W
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-37www.hubbell-wiring.com Wiring Device-Kellems
®
HBLRFT2
MICPK30
Pin and Sleeve
Insulgrip® Mechanical Interlocks - Style II, Fused and Unfused
30 and 60 Ampere, 600/250 Voltage AC/DC, 50-400 Hertz
Rating Insulgrip® Mechanical Interlocks
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
30 3P 4W 600/250 HBL430MIFS2W HBL430PS2W
60 3P 4W 600/250 HBL460MIFS2W HBL460PS2W
Rating Insulgrip® Mechanical Interlocks
Amps
Poles
and
Wires
Receptacle/
Connector
Configuration*
Maximum
Voltage
AC/DC
Mechanical Interlock
Mating Plug
30 3P 4W 600/250 HBL430MIS2W HBL430PS2W
60 3P 4W 600/250 HBL460MIS2W HBL460PS2W
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
*CAUTION: To avoid electrical shock, review premises carefully and DO NOT use if Pin and Sleeve configuration (design)
is already in a circuit having a rating differing from the rating of this device.
**While in use or with cover closed.
Style II - Fused
Style II - Unfused
Type 4X**
HBL30MIFRSHBLACFSNO
Gray Style Switch
ACFSNO 30MIFRS
Black Style Switch
Replacement Auxiliary Contacts
Description Black Style Switch Gray Style Switch
Auxiliary contact, normally open, A600 pilot duty, break before break. ACFSNO HBLACFSNO
Auxiliary contact, normally closed, A600 pilot duty, break before break. ACFSNC HBLACFSNC
Note: Auxiliary contacts are specific to the style switch noted and are NOT interchangeble.
Replacement Switches
Description Black Style Switch Gray Style Switch
For 30A fused switches. 30MIFRS HBL30MIFRS
For 60A fused switches. Gray Style switch will retro fit Black Style switch. HBL60MIFRS
For 30A unfused switches. 30MISRS HBL30MISRS
For 60A unfused switches. Gray Style switch will retro fit Black Style switch. HBL60MISRS
Note: If replacing a Black Style switch, you must use the 30MIFRS. All other applications can use the Gray Style switch.
Watertight Closure Plug Kits
Description Catalog Number
For 30A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK30
For 60 and 100A Circuit-Lock® unfused and fused Pin and Sleeve mechanical interlocks. MICPK60
Replacement Mounting Feet
Description Catalog Number
Replacement mounting feet and screws for 30 and 60A fused mechanical interlocks. HBLRFT2
Note: Package of 10 feet and 10 screws.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-38 Wiring Device-Kellems
®
11.46"
(291.6)
4.00" (101.6) 30A
5.00" (127.0) 60A
1.51" (38.4) 30A
1.68" (42.7) 60A
15.03"
(381.8)
7.27"
(184.7)
15.36"
(390.1)
14.48"
(367.8)
12.37"
(314.2)
3.60"
(91.4)
7.19"
(182.6)
9.31"
(236.5)
10.18"
(258.6)
8.43"
(214.1)
Pin and Sleeve
Technical Information
Specifications, HP Ratings and Dimensions
Performance
Electrical
Dielectric Voltage Withstands 3,000VAC Min.
Max. Working Voltage 250VDC/600VAC.
Current Interrupting Certified for current interrupting at full rated
current and voltage.
Short Circuit Suitable for use on a circuit capable of
Withstand Rating delivering not more than 200,000 RMS
symmetrical amperes at the voltage rating
of receptacle.
Operations Mechanical 10,000 cycles minimum.
Mechanical
Impact Resistance In accordance with UL 746C.
Terminal Identification In accordance with UL, CSA and
international conventions.
Product Ratings Ratings are part of the external label and
molded into the receptacle housing.
Mounting External adjustable feet.
Environmental
Moisture Resistance Outdoor - 4X (Watertight, Washdown);
Indoor - 12 (Dust-tight, Falling dirt).
Ingress Protection IP66 Suitability.
Flammability UL94-5VA and V-0 Classification.
Operating Temperatures Max. Continuous +60°C;
Min. Continuous -40°C w/o impact.
UV Resistance All exposed insulating materials are
UV stabilized.
Fuse Types UL Listed Class “J.
CSA Certified HRCI-J.
Horsepower Ratings
30A Horsepower Ratings 60A Horsepower Ratings
3 Phase A.C. Standard Maximum* 3 Phase A.C. Standard Maximum*
200-240V 3 7.5 200-240V 7. 5 15
480V 5 15 480V 15 30
600V 7. 5 20 600V 15 50
Note: *Requires time delay fuses.
Dimensions
Typical Specifications
Manufacturer’s Identification Hubbell HBL460MIFS2W
Description Fused Insulgrip® Pin and Sleeve
Mechanical Interlock
Electrical Type 3 Pole + Earth
Rating 60A, 250VDC/600VAC
Configuration Per UL 1686 C1
Enclosure Type (UL 50E) Outdoor - 4X (Watertight, Washdown)
Indoor - 12 (Dust Tight, Falling Dirt)
Ingress Protection IP66 Suitability
Certification UL Listed for US and Canada
Note: This device provides fused switched control of a plug connected load and
includes an interlocking feature to prevent the plug from being disconnected
or the door from opening while the receptacle is energized. The switch
cannot be turned on until the plug is fully inserted.
Materials
Part Material
Base, Door and Handle Valox®
Conduit Hub Zinc, 30A – 1 in., 60A – 1¼ in. NPT
Enclosure Gasket Neoprene
and Shaft Seal
Shaft and Mounting Inserts Brass
Ground Plate Galvanized Steel
Enclosure Screws Stainless Steel
and Hinge Spring
Hinge Pin Nickel-Plated Brass
Contact Carrier Thermoset Polyester
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Dimensions in Inches (mm)
Note: 30A – 1 inch NPT hub supplied; 60A – 1¼ inch hub supplied.
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
G-39www.hubbell-wiring.com Wiring Device-Kellems
®
HBLVSQ3034
Hazardous Location Non-Fused UL1686 Mechanical Interlocks and Plugs
Hubbell’s hazardous location line of non-fused mechanically interlocked
disconnect switches are typically used for applications with the presence of
flammable gasses or vapors, ignitable dusts and fibers. They are also suitable for
use in outdoor or indoor damp, wet and dirty locations or in areas where frequent
wash downs, heavy rain, or water spray routinely occurs. These switches are
compact in size to reduce cost and make it easier to position on the wall or piece
of equipment. The enclosures are made of copper-free aluminum and have a
polyester/epoxy finish to prevent corrosion. The high visibility handles can be
locked out to comply with OSHA lock out/tag out regulations.
Features
Product is UL1686 and is fully interchangeable with other UL1686 configured and listed devices.
NEMA 4X with receptacle lid turned shut or with plug locking ring tightened.
Handle mechanism is chemical resistant Valox® (TM Sabic) thermoplastic.
Plug and switch are interlocked. Switch cannot be turned “ON” without fully inserted plug.
Plug cannot be removed with switch in “ON” position.
Plug held in place when switch is “Off” for convenience. Pull operated release mechanism.
Auxiliary Contact (late-make early-break) contact rated 10 Amp, 1/3 HP at 125/250VAC.
Can be used for operating pilot lights or starter coils.
Feed-through construction.
Internal switch horsepower rated as “suitable as a motor disconnect”.
VSQ Hazardous Location Ratings
Class I, Div. 1 & 2, Groups B,C,D
Class I, Zones I & 2, Groups IIB+H2, IIA
Class II, Div. 1 & 2, Groups F & G
Class lll
NEMA 3, 4, 4X, 7 (B,C,D), 9 (F,G)
Control Products
Wiring Devices for Hazardous Locations
Features and Benefits
HBLVP3485
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Copper-free aluminum construction
with electrostatically applied polyester/
epoxy nish to prevent corrosion
Large visible rotary handle with
“On-Off” indicator allows a quick
means of disconnecting power
Lockable handle to meet
OSHA Lockout/Tagout
regulations
Compact NEMA 4X
enclosure and footfrint
allows easy installation
in tight locations
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com
www.hubbell-wiring.comG-40 Wiring Device-Kellems
®
Control Products
Wiring Devices for Hazardous Locations
30 and 60 Ampere
Dimensions
CD
A
E
BF
30 and 60 Amp Non-Fused UL1686 Mechanical Interlocks and Plugs
Amp Circuit Mechanical Interlock Plug
30 Amp
600V AC
2W 3P HBLVSQ3023 HBLVP3385
3W 4P HBLVSQ3034 HBLVP3485
60 AMP
600V AC
2W 3P HBLVSQ6023 HBLVP6385
3W 4P HBLVSQ6034 HBLVP6485
Note: HBLVSQ 30 Amp models come standard with 1" drilled and tapped conduit openings top and bottom plus two 1" x ¾"
reducers and one ¾" close-up plug for maximum flexibility. 60 amp models come with one 1½" opening on top and bottom
and one 1½" close-up plug.
Horsepower Ratings (VAC)*
Amp Circuit 120 240 480 600
30 Amp 2 5 10 15
37.5 15 20
60 Amp 10 15 20
10 25 30
Note: *Internal switch only.
D
A
BE
C
Plugs A B C D E
30A Both 6.69 (170) 3.00 (76) 1.88 (48) 5.38 (137) 2.53 (64)
60A, 3 Pole 8.81 (224) 3.38 (86) 2.25 (57) 6.50 (165) 3.00 (76)
60A, 4 Pole 8.81 (224) 3.69 (94) 2.53 (64) 6.50 (165) 3.00 (76)
Wire Range 30A 60A
Reg. Stranded #10 – #6 #6 – #4
Extra Flex #10 – #8 #6 – #4
Grip Range .55–1.2 (1430) .65 –1.5 (1638)
Mechanical Interlocks A B C D E F
30A 5.75 (146) 10.50 (267) 9.75 (248) 3.75 (95) 3.13 ( 79) 8.13 (206)
60A 8.13 (206) 14.16 (360) 11.28 (287) 4.03 (102) 2.50 (64) 11.38 (289)
HBLVSQ3034
HBLVP3485
Dimensions in Inches (mm)
Courtesy of Steven Engineering, Inc. - 230 Ryan Way, South San Francisco, CA 94080-5370 - Main Office: (650) 588-9200 - Outside Local Area: (800) 258-9200 - www.stevenengineering.com

Navigation menu